Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Sweep for Winston-Salem Homeowners
A dirty flue doesn’t announce itself. What shows up first is usually a smoky draft, a black smear on the fireplace face, or an insurance letter asking for proof of maintenance. Our technicians have up to 9 years of experience and treat your chimney as a system – flue, cap, damper, crown and firebox together – so the sweep answers a question about the whole assembly, not just the pipe. We answer 24/7. Fast dispatch from 7am to 7pm. Call (866) 343-2983 to book a visit.
Chimney Sweep Services
Chimney Sweep Services cover the full set of tasks a wood-burning chimney needs to stay safe and draft properly. You need them when creosote has built up, when the fire smokes back into the room, when a cap or damper has failed, or before a home inspection turns up a problem. Jasper Chimney Sweep handles sweeping, repair and inspection under one roof, using professional-grade materials like DuraFlex flexible liner systems and HeatShield ceramic sealant when a repair is warranted. A standard sweep is built into the inspection visit; if a liner repair is needed, the estimate is written before any work starts.
What a Sweep Covers
A sweep covers the flue, firebox, smoke chamber, damper area and cap – not just the visible opening. We run the brushes with drop cloths in place and check the masonry for gaps, cracks or crumbling mortar while we’re there. Anything that looks like a repair gets photographed and discussed before we leave.

When to Book One
Book a sweep after a full burn season, before the first cold snap, or when you notice a glaze on the flue walls. If you’ve never had one done since moving in, a full inspection paired with a sweep is the right starting point. A chimney that hasn’t been checked in years is worth looking at before you use it again.

Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cleaning
Chimney Cleaning is the hands-on work of removing soot, creosote and debris from inside the flue and firebox. It’s needed when you’ve burned more than a cord of wood in a season, when the fireplace smells smoky even when cold, or when a previous owner’s maintenance history is unknown. Our technicians clean with the chimney treated as a system, checking from the firebox up to the cap so nothing gets missed. Most Winston-Salem homes need cleaning once a year with regular wood burning; we’ll tell you if your usage means less.
What We Remove
A cleaning pulls soot from the smoke chamber and shelf, creosote from the flue walls, and whatever has fallen in from the cap over the year. We use drop cloths and a high-efficiency vacuum so the room stays clean while we work. The firebox gets swept out and the glass or screen cleaned as part of the visit.
How Often Is Enough
A chimney should be cleaned when a quarter-inch of creosote has accumulated on the flue walls, which for most households burning regularly means roughly once a year. Households that burn lightly might go two seasons between cleanings. We’ll give you a realistic interval based on what we actually find.
Fireplace Cleaning
Fireplace Cleaning goes beyond the firebox itself to the visible face, hearth, glass and screen, plus the smoke chamber behind the damper. You need it when ash has piled up, when the glass is fogged with soot, or when the firebox smells of old smoke in warm weather. Our team cleans the firebox, sweeps the hearth, and checks the damper operation while we’re cleaning – so you know the fireplace opens and closes cleanly. It’s a natural add-on to a regular chimney sweep and usually built into the same visit.
Firebox and Hearth Detail
The firebox and hearth hold most of the soot that gets on the room side. We scrape and sweep the firebox floor, wipe down the brick or refractory panels, and clear the hearth of ash and stains. If the firebox has cracks in the mortar joints, we note them in the inspection report.
Glass and Screen Care
Glass doors fog with soot and creosote over a season, and screens collect ash dust on both sides. We clean both with fireplace-safe products that don’t damage the finish. The result is a fireplace that looks ready for the next fire, not one that needs airing out before use.
Chimney Services
Chimney Services is the umbrella that covers sweeping, cleaning, inspection and repair – all handled by the same company. You need a full-service call when you’re unsure what’s wrong, when several issues are showing up at once, or when you’re preparing a home for sale and need a written condition report. Jasper Chimney Sweep does the inspection, the sweep and the repair in-house, so the team that finds a problem is the same team that fixes it. Typical repair work – caps, dampers and liner sealant – is quoted as a written estimate after the inspection, never before.
Inspection, Sweep and Repair Together
Doing all three in one visit is cleaner than splitting the work across three contractors. The technician who inspects already knows what was found during the sweep. The repair quote reflects what’s actually there, not a guess.

Same-Company Accountability
When the sweep and the repair are handled by one team, nothing falls between contractors. If a cap needs replacing, we’re the ones who installed it, so follow-up is straightforward. There’s no need to re-explain the whole history on a second visit.
Chimney Sweep Certified
Chimney Sweep Certified describes the professional standard a sweep should work to – trained, insured and using materials certified for chimney use. Our technicians have up to 9 years of experience and work with six professional-grade brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield. That matters most at the repair stage, when a cheap substitute cap or a big-box liner underperforms the branded version. We’re insured, and work is written up in a report before anything is signed off.
Materials That Meet the Standard
Professional-grade parts are the difference between a repair that lasts and one that needs redoing. DuraFlex liner systems are built for flexible relining that fits the flue precisely. HeatShield ceramic sealant repairs cracked liners that would otherwise need replacement. Gelco and Famco caps and dampers are built to stay put for years.
What Certification Means for Your Chimney
An insured, experienced technician knows how to spot failing masonry before it becomes a structural problem. Chimney sweeps who follow the standard check the full assembly, not just the flue. The written report you get at the end is the proof of what was examined.
Gas Fireplace Cleaning
Gas Fireplace Cleaning covers the burners, logs, glass and venting on a gas fireplace – a different job from sweeping a wood flue, but just as important. You need it when the flame has turned yellow instead of blue, when soot collects on the glass, or when the logs have dust buildup that affects combustion. Even a gas fireplace that’s only used occasionally pulls dust and debris into the burner area over time. We clean the components and check the venting at the same time, since a gas unit won’t draft properly if its flue is blocked.
Burner and Log Cleanup
Gas burners clog with dust, lint and soot over a season, which changes the flame pattern. We clean the burners and the logs without disturbing the gas connections. If the unit needs servicing beyond cleaning, we’ll say so.
Glass and Vent Checks
Glass on a gas fireplace fogs from soot faster than wood-burning doors do. We clean it with products that don’t scratch the coating. At the same time, we check the venting and note any obstruction in the report.
Chimney Maintenance
Chimney Maintenance is the ongoing routine of annual sweeps, inspections and small repairs that keep a chimney working safely across seasons. It’s most relevant in Winston-Salem’s damp winters, which are hard on mortar joints and caps – freeze-thaw cycles open hairline cracks that let water in, and water damage is behind many of the masonry repairs we’re called out for. A maintenance visit pairs a sweep with a full-system inspection and a written condition report. If the only thing needed is a cleaning, we’ll tell you that; nothing is recommended without evidence you can see yourself.
Annual Inspection and Report
An annual inspection catches small problems before they turn into structural ones. We go over the crown, cap, flashing and masonry exterior, then document each finding. You get a written record you can share with your insurer or a buyer’s inspector.
Small Repairs Before They Grow
Hairline cracks in the crown or a loose cap look minor, but water finds both. When we spot them, we quote the repair then and there. If the fix can wait a season safely, we’ll say so.
Brands We Service
We work with DuraFlex and HeatShield on the repair side. DuraFlex flexible liner systems are used for relining jobs where the flue needs a precise fit around an offset or a transition. HeatShield ceramic sealant is used on cracked clay liners where the surrounding tile is still sound – it’s a repair many generalists don’t carry or know how to apply. Our technicians know where each system is warranted, and where it isn’t.
For the top of the chimney, we install Gelco and Famco caps and dampers. Both brands are built for longevity, not the cheap replacements that need re-servicing in a couple of seasons. Copperfield and Olympia Chimney round out the materials we work with on liner and cap work. Whether you have DuraFlex, HeatShield, Gelco, Famco, Copperfield or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke rolling back into the room. A fire that smokes into the room usually points to a blocked flue, a closed damper or a pressure problem. Nothing about that gets better with use, and using it again can push carbon monoxide into the living space.
- A strong smoky smell when the fireplace is cold. Cold chimneys that smell smoky in warm weather are usually pulling air down through an open flue or a missing cap. A cap and damper check usually solves it.
- Black, glassy creosote on the flue walls. Glazed creosote is the stage that’s hardest to brush off and the most combustible. It’s worth having a sweep look before the next burn season starts.
- A cracked or missing chimney cap. A damaged cap lets water, birds and debris into the flue. Water intrusion damages mortar and the smoke chamber, and it’s the most common cause of preventable masonry repair.
- Loose bricks, crumbling mortar or a tilted crown. Masonry that’s moving is a structural concern and shouldn’t wait. Freeze-thaw cycles make small cracks worse each winter.
Our Process, Step by Step
- 1
Book and confirm. Call (866) 343-2983 and we’ll set a visit. We answer 24/7, and fast dispatch runs from 7am to 7pm. You’ll get a clear arrival window.
- 2
Full-system inspection first. Before any cleaning starts, we inspect the flue, firebox, damper, cap and masonry exterior. We photograph anything worth flagging. You see what we see before we start the sweep.
- 3
Sweep with drop cloths down. We run the brushes through the flue with the room protected. A high-efficiency vacuum keeps soot out of the air. The firebox and hearth are cleared as part of the visit.
- 4
Check the cap and top of the chimney. Cap, crown and flashing are inspected from above or by camera. If a Gelco or Famco cap is called for, we quote it in writing before ordering anything.
- 5
Written report and quote. When the visit is done, you get a written summary of the condition and any repairs we recommend. Nothing is done beyond the estimate. If work can safely wait, we say so.
How Much Does Chimney Sweep Cost in Winston-Salem?
Chimney sweep pricing in Winston-Salem depends most on what’s found during the inspection – a flue with heavy creosote takes longer to clean than one that’s been swept annually. A standard sweep with a basic inspection is typically the lower end of the range; add a full report and camera inspection and it moves to the middle. If the visit turns into a repair – a new cap, a damper, a liner seal – the quote is written per job, and the written estimate sets the final price.
What affects the price most: how heavy the creosote buildup is, whether the flue is straight or has an offset, whether a cap needs replacement, whether the fireplace is wood or gas, and whether the masonry has cracks worth repairing. A three-flue home costs more to sweep than a single-flue fireplace. Gas fireplace cleaning is priced differently from a wood sweep because the work is different.
The best way to avoid overpaying is to get the inspection report in writing and see the photos before approving any repair. A chimney that doesn’t need a repair shouldn’t get one sold, and a repair that’s been quoted with photos is easy to verify. Our estimates are free, and nothing gets recommended without evidence you can see for yourself. Call (866) 343-2983 for an exact quote.
Our Service Area Near Winston-Salem
We serve Winston-Salem and the surrounding communities, including Clemmons, Rural Hall, Lewisville, Midway, Tobaccoville, Bermuda Run, King, Welcome, Lexington, Mocksville and Tyro. Dispatch reaches most of these towns within the same working window, and we set arrival windows when you book rather than leaving you waiting. One call covers the whole area, with the same team handling inspection, cleaning and repair even when we’re working outside the city limits. Whether you’re in a historic Ardmore house or a newer subdivision near Clemmons, we bring the same standard – see our chimney sweep page for Clemmons-specific details.
Serving Winston-Salem, NC – Our Local Coverage Area
We serve Winston-Salem and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Sweep in Winston-Salem
A chimney sweep is a trained technician who cleans the inside of a chimney and checks the full system for safety and function. The visit removes soot and creosote and pairs with a visual inspection of the flue, cap, damper and firebox. It’s a maintenance service, not just a cleaning: the sweep is the occasion to find problems before they turn costly. Call (866) 343-2983 for a free estimate.
A standard sweep and inspection typically takes 45 minutes to an hour for a single-flue fireplace. Homes with two or three flues or heavy creosote will take longer, often up to two hours. Gas fireplace cleaning is usually faster than a wood sweep. We’ll give you a realistic window when you book.
A standard sweep in Winston-Salem typically runs in the lower-to-middle range of the pricing we quote, with repairs priced separately and set per job. The final price depends on creosote buildup, number of flues and any cap or damper work. Because ours is a free estimate, you know the number before the work starts. Call (866) 343-2983 for an exact quote – estimates are free.
Yes. We install DuraFlex flexible liner systems for relining jobs and apply HeatShield ceramic sealant to cracked clay liners where the surrounding tile is still sound. Both are part of our core repair offering, not something we send out. If your chimney already has either brand installed, we can inspect and service it.
Same-day visits are often possible when you call earlier in the day. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday; we’re closed Saturday. A call outside dispatch hours is booked into the next opening. Call (866) 343-2983 to check what’s available.
Our workmanship is backed by the standard for the trade, and installed brands carry their own manufacturer warranty. Because we install Gelco, Famco and DuraFlex products directly, the warranty calls go through us, not through a reseller. We’ll spell out the specifics in writing with your estimate.
Clear the hearth and the floor in front of the fireplace, remove any fireplace tools or screens that are in the way, and keep pets out of the room during the visit. If you’ve had a fire in the last 24 to 48 hours, let us know so we can time the visit correctly. You don’t need to clean anything beforehand – that’s what we’re there for.
Schedule Your Chimney Sweep Service in Winston-Salem Today
Book a sweep, an inspection or a repair with Jasper Chimney Sweep and get a written report on your chimney’s condition before anything gets sold to you. One team handles the full loop – inspect, clean, repair – with professional-grade materials and standard pricing set per job. Call (866) 343-2983 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Jasper Chimney Sweep.