Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Mocksville
If you burn wood in Mocksville, your chimney is working equipment, not decoration. We handle chimney repair across Mocksville and the surrounding Davie County countryside, from the tight brick blocks of the old downtown grid out to the acreage homes where a wood stove carries the whole house. Our technicians have up to 9 years of experience, we treat your chimney as a system rather than a dirty flue, and we can work with your insurer when a claim is part of the picture. Call (866) 343-2983 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.

Why Mocksville Homeowners Call Jasper Chimney Sweep for Chimney Repair
Mocksville homeowners call us because the person who inspects the chimney is the same person who cleans and repairs it. Nothing gets handed off to a handyman halfway through, and nothing gets lost between contractors. You get one standard of work and one written record of what your chimney needs.
We handle all three core services in-house: sweeping, inspection and repair. That matters here, where a routine sweep often turns up a cracked clay-tile flue behind a stove insert or a crown that has lost its overhang. We carry professional-grade materials – HeatShield ceramic sealant for liner repair, DuraFlex flexible liner systems where a reline is the right answer, Gelco and Famco caps and dampers for the top of the chimney – the same brands certified chimney technicians specify nationwide.
Our technicians have up to 9 years of experience reading Piedmont chimneys, and they bring that to every Mocksville address. We serve Mocksville and the towns around it from Winston-Salem, and we know the difference between a downtown stack and a farmhouse flue before we ever climb the roof. If you want the fuller picture of what our chimney repair work covers, that page lays it out.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Crown Repair in Mocksville
Chimney Crown Repair in Mocksville usually starts with a crown that has cracked, pulled away from the flue, or lost the overhang that throws rain clear of the masonry. Once that overhang goes, Piedmont rain soaks straight into the brick and mortar below it. A typical crown repair in Mocksville runs $450-$1,200, depending on the crown’s size, how much of the old crown has to come off, and whether the flue tile needs resetting while we’re up there.
What a Crown Repair Involves
We break out the failed crown, check the top course of brick and the flue tile for cracks, then pour or form a new crown with the proper slope and a bond break at the flue so it can move without cracking again. The material and the pitch matter more than the shape.
When the Crown Can’t Wait
A crown that’s crumbling into the flue or leaving a visible gap at the edge is letting water in with every storm. Left alone, that water finds the smoke chamber and the ceiling framing below. Crown work is best done before the first cold snap, when the chimney is dry and the roof is safe to work on.
Chimney Repair Companies in Mocksville
Choosing among Chimney Repair Companies in Mocksville comes down to one question: will they show you what’s wrong before they quote a price? Repair work here typically covers spalling brick in the firebox, mortar joints that have washed out, flashing that has pulled away from the roofline, and liners that no longer hold. Most repair jobs in Mocksville run $350-$2,500, with a full reline on a masonry flue landing higher, and a written estimate sets the final price.
Inspection First, Quote Second
Every repair visit starts with a Level 2 inspection and a camera run of the flue. We assess the creosote degree, look for cracked tile and gaps at the smoke chamber, and photograph what we find so you can see it yourself. Nothing gets recommended without that evidence in front of you.
The Repair Materials We Use
HeatShield ceramic sealant repairs a liner that’s cracked but still structurally sound, and it’s a process most generalist services don’t carry or know how to apply. When the flue is too far gone for sealant, a DuraFlex flexible liner gives a precision fit through an offset or an oval flue.

Trusted Brands We Service in Mocksville
The materials we install are the ones chimney professionals trust: HeatShield for ceramic liner repair, DuraFlex for flexible relining, and Gelco and Famco for caps and dampers built to last rather than cheap replacements that need re-servicing in two seasons. We don’t claim to stock parts locally, because we don’t keep a warehouse. What we do is specify the right system for your flue, source it, and install it to the manufacturer’s standard. That keeps turnaround short and means your repair is built on a product with a real track record rather than whatever a big-box shelf had on hand.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Mocksville Homes
The single most useful thing to understand about chimney repair in Mocksville is that the problem splits by where the house sits.
- Shared and adjacent stacks downtown. The old grid packs early-1900s brick houses tight together, so party-wall stacks and adjacent flues are common. A repair that improves draft on one flue can pull smoke or carbon monoxide back through the other if the smoke chamber and damper aren’t re-assessed at the same time.
- Unlined wood-stove flues on outlying acreage. Many Davie County properties heat primarily with a wood stove on a liner that was never updated. A cracked clay-tile flue hidden behind an insert lets creosote and heat reach the framing, and the failure stays invisible until the firebox or the attic tells on it.
- Third-degree creosote glazing. Long-neglected masonry flues in damp Piedmont shoulder seasons build creosote that hardens into a tar-like glaze. It can’t be brushed off, and a crown-and-cap repair done without addressing the glazed liner leaves the fire risk in place for the next heating season.
- Crowns and flashing losing the water fight. Humid summers and cold-enough winters work on mortar and flashing year after year. Once the crown loses its overhang or the flashing pulls free, water gets into the masonry and the damage moves faster than most homeowners expect.
Pricing for Chimney Repair in Mocksville, NC
Here’s what repair work typically costs in the Mocksville market. Mortar repointing and tuckpointing on a chimney run $350-$900. Spalling brick repair, where face brick has popped and needs replacing, runs $400-$1,500 depending on how many courses are involved. Chimney waterproofing runs $300-$700. Flashing repair runs $250-$650. A partial rebuild runs $1,500-$4,500, and a full reline with a HeatShield or DuraFlex system runs $1,800-$4,500 depending on flue length and configuration. Those ranges reflect the scope of the job, the height and access, and the materials specified. Every estimate is free, and the written estimate sets the final price. Call (866) 343-2983 for an exact quote.
We Also Serve Cities Near Mocksville
We work across Davie County and into the neighboring towns, so if you’re just outside Mocksville we can still help. Along with Mocksville, we serve Bermuda Run, Clemmons, Lewisville and Tyro. Each has its own housing pattern, and we scope the repair to the house in front of us. Call and tell us where you are.
Serving Mocksville, NC – Our Local Coverage Area
We serve Mocksville and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Mocksville
No. Third-degree creosote is a hardened glaze bonded to the flue, and a brush passes right over it. It has to be removed by chemical means or by relining over it with a system rated for the condition, which is where HeatShield ceramic sealant or a DuraFlex liner comes in. Call (866) 343-2983 and we’ll camera the flue and show you what’s actually there.
Most chimney repair in Mocksville runs $350-$2,500, with crown repair at $450-$1,200, repointing at $350-$900, waterproofing at $300-$700, and a full reline at $1,800-$4,500. The written estimate sets the final price, and the estimate itself is free. Call (866) 343-2983 for an exact quote.
No. We price per job by the written estimate, and the scope of the work sets the number, not the town. A crown repair on a ranch house in Mocksville and the same repair on a similar house in Winston-Salem come in at the same range. Call (866) 343-2983 and we’ll put the estimate in writing.
Yes. We cover the old downtown grid and the outlying acreage properties across Davie County alike, and we confirm access and roof conditions when we book. Tight downtown lots and long rural driveways both get scoped before we schedule. Call (866) 343-2983. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
The repair carries the manufacturer’s warranty on the system we install plus our own workmanship backing, and we’ll spell out both in writing before any work begins. HeatShield and DuraFlex systems are specified because they hold up, not because they’re easy to source. Call (866) 343-2983 and we’ll walk you through what applies to your job.
If your chimney needs repair in Mocksville, don’t put it off into the next heating season. Call Jasper Chimney Sweep at (866) 343-2983 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’ll inspect, show you the evidence, and give you a written scope before any work starts.
Written by the team at Jasper Chimney Sweep.