Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Midway
Chimney repair in Midway usually starts with a wood stove or a masonry fireplace that’s carried a lot of heat over a lot of winters. That’s the reality of this community, and our chimney repair team works with it every season. We’re comfortable with the rural properties spread across Midway, from older farmhouses off the backroads to manufactured homes on acreage, and we know what those chimneys tend to need before we climb up. Call (866) 343-2983 and we’ll talk through what you’re seeing. We answer 24/7 with fast dispatch from 7am to 7pm.

Why Midway Homeowners Call Jasper Chimney Sweep for Chimney Repair
Midway is unincorporated Davidson County, so a lot of chimney work here lands on a small number of specialized companies. We handle inspection, sweeping, and repair as one company, so nothing gets lost between contractors. Our technicians have up to 9 years of experience, and we install the same professional-grade materials that certified chimney technicians specify: HeatShield for liner repair, DuraFlex flexible liner systems, and Gelco and Famco caps and dampers.
Getting out to Midway takes planning, and we book real appointment windows rather than vague promise-anytime slots. When we inspect, you get a written understanding of your chimney’s condition in plain language, not just a cleaning receipt. If your liner is fine and the crown just needs a patch, we say so. If a burning-season cleaning is all that’s called for, we tell you that too. The team that inspects is the team that sweeps and repairs, and the written estimate sets the final price before any work starts.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Masonry Repair in Midway
Chimney Masonry Repair in Midway often means repairing mortar joints and brick on older farmhouse chimneys that have taken decades of Piedmont humidity and freeze-thaw cycles. A typical mortar repointing job in Midway runs $450 – $1,200, while spalling brick repair or a partial rebuild lands closer to $1,500 – $4,000 depending on how far up the damage climbs. The written estimate you get before work starts sets the final price.
Repointing and Tuckpointing
Retucking tells you where a chimney is losing mortar before the bricks start shifting. We grind out the failing joints, pack in fresh mortar matched to the color and hardness of the original, and leave the wall looking like it belongs. Tuckpointing on decorative outer joints is cosmetic and structural at once; on a Midway chimney that’s spent years in the damp, it’s usually the difference between patching a wall and watching it come apart.
Crown and Flashing Repairs
A cracked crown lets water straight into the masonry every time it rains. We rebuild crowns so the slope sheds water, and we repair flashing where the chimney meets the roof, because the roof line is where most leaks begin. Those leaks often surface as a brown stain on a ceiling rather than anything you can see from the yard.
Chimney Cap Installation in Midway
Chimney Cap Installation in Midway is one of the cheapest fixes that prevents some of the most expensive damage, and it matters here because rural chimneys attract more than their share of birds, raccoons, and squirrels. A standard Gelco or Famco cap installed in Midway typically runs $180 – $450, with custom and multi-flue caps reaching $500 – $900. A cap keeps out rain, animals, and nesting debris, and a good one lasts for years rather than needing replacement in two.
Single-Flue and Multi-Flue Caps
Midway chimneys range from one flue in a manufactured home to a masonry stack serving multiple appliances. A multi-flue cap has to fit the whole crown, not just one opening, and we measure before we order. The cap should shed water and still let the flue breathe.
Caps, Dampers, and Draft
Some Midway home heating problems turn out to be draft problems caused by a missing or undersized cap. A top-sealing damper closing off the flue when the fireplace is idle keeps warm room air from leaving up the stack. We check the cap and the damper together, because they work as a pair.
Trusted Brands We Service in Midway
We work with six professional-grade chimney industry brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. When a Midway liner needs relining, we use HeatShield ceramic sealant where the process suits the damage, and DuraFlex flexible liner systems when the clay tiles are cracked or missing. For caps and dampers we install Gelco and Famco, and Olympia Chimney products come into play on larger liner projects. We specify these brands because they’re what certified chimney technicians rely on, not the big-box substitutes. We don’t keep stock in Midway; the right parts get ordered for your job, and turnaround stays quick.

See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Midway Homes
- Shared and adjacent flues. In attached properties, a neighbor’s appliance can vent into the same stack, so a draft reading from your fireplace may not reflect your own system at all. We inspect the full stack to sort out which flue belongs to whom.
- Cracked clay tile liners. Older rural farmhouses often have clay tiles that crack or spall without anyone noticing, and creosote seeps into the masonry behind them. That’s a fire risk the homeowner never sees from the hearth.
- Missing or rusted-out caps. A cap that’s gone lets rain and wildlife straight down the flue, and in Midway that often means a nest sitting in the chimney all summer. A quick cap replacement ends the cycle.
- Third-degree creosote in wood stoves. Rural homes that heat with wood routinely have glazed, hardened creosote low in the flue that a standard brush won’t remove. That buildup is what turns a small flue fire into a serious one.
One more complication: tight roof access in Midway’s denser streets makes it hard to inspect crowns, caps, and flashing without walking on shingles that weren’t meant for foot traffic. We take the time to do it without wrecking gutters or shingles, because a repair that damages the roof isn’t a repair.
Pricing for Chimney Repair in Midway, NC
Pricing in Midway is set per job by a written estimate, and the estimate is free. Typical ranges: mortar repointing $450 – $1,200, spalling brick repair $600 – $1,800, chimney waterproofing $300 – $700, flashing repair $250 – $650, chimney cap installation $180 – $450 for standard Gelco or Famco units, and a partial rebuild $1,500 – $4,000. What moves the number is access, height, how much the liner is damaged, and whether a cap and flashing join the job. Costs here run close to nearby Winston-Salem because the work is the same work, though rural properties and tight roof access can add labor. Call (866) 343-2983 for the estimate; nothing gets done until you’ve seen the written price.
We Also Serve Cities Near Midway
Midway sits in a part of Davidson County where homeowners often cross into Forsyth for work and shopping, and we serve that whole stretch. We handle chimney repair in Midway, along with Winston-Salem, Welcome, Clemmons, and Lewisville. If you’re not sure whether your address falls in our range, call and we’ll tell you straight.
Serving Midway, NC – Our Local Coverage Area
We serve Midway and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Midway
Once a year, and sooner if you burn heavily through the winter. Because so many Midway homes use wood stoves as a primary heat source, burn volume climbs fast and creosote builds faster than in a house that lights an occasional fire. Annual inspection before burning season is the practical schedule; a spring look catches winter damage while it’s still cheap to fix. Call (866) 343-2983 to book an inspection, free estimate included.
Third-degree creosote is glazed, hardened creosote that fuses to the flue liner and won’t come off with a normal brush. It’s common in Midway because wood heat is a cost hedge here, and stoves that burn hard all winter without regular sweeping build it up fast. HeatShield or a stainless liner system may be the answer once the tiles are compromised. Call (866) 343-2983 and we’ll help you sort out what your flue actually needs.
Yes, in Midway’s older attached properties a neighbor’s appliance can vent into a shared stack, so smoke and fumes cross over and draft readings get misleading. We inspect the whole stack to identify which flue serves which appliance before recommending anything. It’s one reason a proper inspection matters more here than a quick sweep. Call (866) 343-2983 for a full-stack inspection.
Water stains on the ceiling below the chimney, a crumbling or cracked crown from the roof, and a missing, rusted, or animal-clogged cap are the usual signs. In Midway’s humid summers an uncapped flue pulls moisture in all season and turns a small repair into masonry work. A cap replacement like Gelco typically runs $180 – $450, which makes it an easy call to make. Call (866) 343-2983 to get the estimate.
Piedmont humidity and damp winters soften creosote so it becomes more acidic, which is harder on clay tile liners than dry heat ever is. Unused summer chimneys here also draw moisture, nest in wildlife, and can grow mold, so spring inspection is when we catch winter damage before it spreads. That’s part of why Midway repair work leans toward waterproofing, crown rebuilding, and relining rather than quick cosmetic fixes. Call (866) 343-2983 for a free estimate.
When you call, here’s what happens: we answer 24/7, book a visit, and send a technician with fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed on Saturday. Call (866) 343-2983 for a free estimate – the written price sets the final cost, and we’ll tell you plainly what needs repairing now and what can safely wait.
Written by the team at Jasper Chimney Sweep.