Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Winston-Salem?
Chimney liner installation in Winston-Salem typically costs $2,400 to $6,800, and a partial chimney rebuild usually runs $3,000 to $9,500, depending on height, materials and how much masonry has to come down. A straightforward stainless liner for a single-story chimney often lands near the low end, while a full rebuild on a tall exterior stack with a new crown pushes toward the high end. Every job is priced per job by a written estimate, so the range you see here is a starting point, not a quote.
We treat your chimney as a system, not just a dirty flue. That matters for pricing, because a liner and a rebuild touch the same parts of the chimney: the flue, the crown, the cap, and the mortar that holds the stack together. When one part fails, the others tend to be close behind, and a specialist who inspects all of it before quoting will usually save you money over piecemeal repairs.
If you want a real number for your chimney, call (866) 343-2983. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Chimney Liner & Rebuild Cost Breakdown (2026)
The table below shows typical Winston-Salem ranges for each part of the work. Most jobs combine two or three of these line items. A liner-only job is the simplest; a rebuild that includes relining costs the most.
| Line Item | Typical Range | What It Covers |
|---|---|---|
| Stainless flexible liner (single-story, straight flue) | $2,400 – $3,800 | DuraFlex or Olympia liner, insulation, top plate, and connection to the appliance |
| Stainless flexible liner (two-story or offset flue) | $3,600 – $6,800 | Longer run, offset breach, or a flue that needs clearing before the liner goes in |
| HeatShield ceramic liner repair | $1,200 – $3,200 | Resurfacing a cracked clay flue instead of full replacement, when the flue is sound enough |
| Chimney cap and damper (Gelco or Famco) | $350 – $1,100 | Top-sealing cap, stainless or multi-flue cap, and top-mount damper installation |
| Crown repair or rebuild | $600 – $1,800 | Patching cracks or pouring a new crown with the proper overhang and bond break |
| Partial rebuild (top few courses and crown) | $3,000 – $5,500 | Removing spalled brick, rebuilding the top section, new crown, new cap |
| Full rebuild above the roofline | $6,500 – $9,500 | Full stack rebuild from the roof line up, new flashing, crown, cap, and liner if needed |
| Flue tile replacement (individual tiles) | $900 – $2,400 | Removing and replacing cracked clay tiles when a liner isn’t the right answer |
What pushes a Winston-Salem job toward the high end? Height and access are the two biggest drivers. A chimney on a steep roof or set back from the driveway takes longer to work on safely, and that labor shows up in the estimate. Masonry condition matters just as much: soft, spalling brick from years of freeze-thaw cycles has to come down further before new work can go up. On the other end, a single-story ranch with a straight flue and a cap that’s already in good shape is about as economical as a liner job gets. The written estimate is what sets your final price, and we put the numbers in writing before any work begins.
What Affects Chimney Liner & Rebuild Pricing in Winston-Salem
Pricing here isn’t random. The same six factors shape almost every estimate we write in Winston-Salem, and understanding them helps you read a quote with confidence.
- Chimney height and roof pitch. A taller stack means more material and more time on ladders and staging. A steep roof adds setup time for safe access, so a two-story chimney on a steep pitch costs more than a single-story chimney on a shallow one.
- Flue condition and shape. A straight, clean flue takes a flexible liner quickly. An offset flue, a flue with heavy creosote, or one that’s partially collapsed adds prep work. DuraFlex flexible liners are made to navigate offsets, but every bend costs time.
- Masonry condition. Winston-Salem sits in a climate with real freeze-thaw swings through the winter, and brick that has absorbed water over many seasons will spall and crack. The more deteriorated brick there is, the more of the rebuild you’re paying for.
- Liner material and brand. Professional-grade stainless liners from DuraFlex and Olympia Chimney cost more than big-box substitutes up front but hold up far longer. The material choice is one of the biggest swing factors in the total.
- Whether HeatShield is an option. If the clay flue is cracked but still structurally sound, HeatShield ceramic sealant can restore it without a full reline. That’s a meaningful cost difference, and it’s a process many generalist services don’t carry or know how to apply.
- Cap, damper and crown needs. A failing cap lets water straight into the flue. Gelco and Famco caps and dampers are built for longevity, and adding them to a liner or rebuild job is far cheaper than dealing with water damage later.
Our technicians have up to experience, and that experience mostly shows up in the estimate: knowing when HeatShield will hold and when it won’t, when a partial rebuild is enough and when the whole stack above the roofline needs to come down. Getting that call right the first time is what keeps the total reasonable.
How to Save on Chimney Liner & Rebuild in Winston-Salem
There’s no way around the material cost of a good liner, but there are real ways to keep a Winston-Salem job from growing. Here’s what we tell homeowners before they commit.
- Get the inspection before the problem spreads. A small crown crack patched early is a fraction of the cost of a partial rebuild later. Water is the main enemy of a Winston-Salem chimney, and catching it early is the biggest money-saver there is.
- Ask whether HeatShield fits your flue. If your clay liner is cracked but sound, ceramic sealant repair can cost less than half of a full reline. Ask directly whether it’s an option for your chimney.
- Bundle the cap and crown with the liner job. Having the same team handle the liner, cap, damper and crown in one visit avoids paying for setup twice. Single-company accountability keeps nothing falling between contractors.
- Don’t put off the rebuild past the point of repair. A leaning or badly spalled stack only gets more expensive to fix. Waiting rarely saves money on masonry.
- Compare full written estimates, not verbal ballparks. A free estimate from a chimney specialist will list materials and labor line by line, so you can see exactly where the money goes.
For a written estimate on your Winston-Salem chimney, call (866) 343-2983. We answer 24/7, fast dispatch from 7am to 7pm, and the estimate is free with no obligation.
Can You Fix a Liner or Rebuild the Same Day?
Most liner installations are completed in a single visit. A straightforward stainless liner for a single-story chimney usually takes one day, and cap or damper work can often be added to that same visit. A partial or full rebuild is a multi-day job by nature, because mortar and masonry need time to set and cure properly.
When you call, we’ll give you a realistic timeline based on what your chimney needs. If a door or flue problem leaves you without heat, call and we’ll find the soonest opening. Call (866) 343-2983. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Is It Cheaper to Repair or Replace a Chimney Liner?
Repair is cheaper when the flue is structurally sound: HeatShield ceramic sealant repair typically runs $1,200 to $3,200, compared with $2,400 to $6,800 for full liner replacement. Replacement is the better value when the clay tiles are broken, offset or crumbling, because sealant won’t hold on a flue that’s lost its structure.
The right answer depends on the condition of the flue, not on the price tag alone. A full-system inspection shows you which path makes sense for your chimney before any work starts. Call (866) 343-2983 for a free estimate, and we’ll lay out both options in writing.
FAQs – Chimney Liner & Rebuild Cost
How much does chimney liner installation cost in Winston-Salem?
Chimney liner installation in Winston-Salem typically costs $2,400 to $6,800, with most single-story straight-flue jobs landing between $2,400 and $3,800. Two-story or offset flues run higher. Call (866) 343-2983 for an exact quote, and estimates are free.
How much does a chimney rebuild cost in Winston-Salem, NC?
A partial rebuild in Winston-Salem generally runs $3,000 to $5,500, while a full rebuild above the roofline runs $6,500 to $9,500. The final price depends on how far the damage extends and how much brick has to be replaced. Call (866) 343-2983 to book a free estimate.
Do I really need a chimney liner?
Yes, if your flue is unlined, cracked or not sized for your appliance: a liner protects the masonry and routes combustion gases safely up and out. Most modern codes require a properly sized liner, and many insurance carriers ask about it. Call (866) 343-2983 and we’ll inspect your flue and tell you exactly what it needs.
How long does a chimney liner last?
A professional-grade stainless liner from DuraFlex or Olympia Chimney typically lasts 15 to 20 years or more with regular sweeping and a good cap. Big-box substitutes tend to fall short of that lifespan. Call (866) 343-2983 to talk through the right liner for your chimney.
Can you repair a cracked clay flue without a full reline?
Often, yes. HeatShield ceramic sealant repair can restore a cracked but structurally sound clay flue for about $1,200 to $3,200, well under the cost of full replacement. Whether it’s the right call depends on the flue’s condition, so an inspection comes first. Call (866) 343-2983 for a free estimate.
Why Work With a Chimney Specialist
A liner or a rebuild is only as good as the system around it: the crown that sheds water, the cap that keeps rain and animals out, the damper that controls the draft, and the masonry that holds it all together. We handle that whole system in one place, so the team that inspects your Jasper Chimney Sweep chimney is the same team that sweeps and repairs it. That’s the accountability you don’t get when a generalist handyman does half the job and a mason does the other half.
We work with professional-grade brands the certified industry relies on: DuraFlex flexible liners, HeatShield ceramic sealant, Olympia Chimney liners, Copperfield components, and Gelco and Famco caps and dampers. Materials are specified for the job, not substituted for whatever’s cheapest on the shelf. And because we do sweeping, repair and inspection in-house, nothing falls through the cracks between contractors.
If you’re in the Winston-Salem area, get a written picture of your chimney’s condition before any work begins. That applies whether you’re getting ready to sell, dealing with a concern from your insurer, or simply burning wood every winter and wanting to do it safely. You can learn more about how we work on the Winston-Salem page.
Get Your Free Chimney Estimate
Pricing online gets you a range. A written estimate gets you the actual number for your chimney. Our free estimates cover the full system, from cap to crown, and we put the figures in writing before any work starts. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Call (866) 343-2983 today to schedule your free chimney liner or rebuild estimate in Winston-Salem.
Pricing reflects the Winston-Salem market as of 2026. Jasper Chimney Sweep offers free estimates – call (866) 343-2983.
Written by the team at Jasper Chimney Sweep.
What Our Customers Say
"Fast, fair, done right. No notes."
- Farah Saleh"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Lisa Reed"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Mark Rhodes