Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Bermuda Run
If your fireplace in Bermuda Run has been sitting idle since last winter, now is the right time to have it looked at. We handle chimney sweeping, repair, and inspection for the golf-course homes and custom builds all around the Bermuda Run Country Club, and we know what tends to go wrong here. The humid Piedmont summers followed by months of hard fall and winter burning take a toll on chimneys that don’t get checked. Our technicians have up to 9 years of experience and treat your chimney as a system, not just a dirty flue. To book a sweep: call (866) 343-2983. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Bermuda Run Homeowners Call Jasper Chimney Sweep for Chimney Sweep
Homeowners in Bermuda Run are a particular group. They take their fireplace seriously, they want the work documented, and they’d rather pay once for a proper job than twice for a quick fix. We’ve built a reputation here by showing up, explaining what we find, and handing over a written record of your chimney’s condition after every sweep. That matters whether you’re burning wood regularly, getting a home ready to list, or answering a note from your insurance carrier.
Because the homes along the river and the fairways share so much in common, our technicians know what to look for before they open the firebox door: the specific chase construction, the factory-built fireplaces, and the signs of moisture trouble that show up first on the sun-facing exterior walls. The team that inspects your chimney is the same team that sweeps and repairs it, so nothing gets lost between contractors. That single-company accountability is a large part of why homeowners here call back. To schedule, call (866) 343-2983. We answer 24/7.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Sweep Certified in Bermuda Run
A chimney sweep certified for Bermuda Run homes starts with a full-system inspection, not just a brush down the flue. On a newer factory-built fireplace, that means checking the cap, the chase cover, the damper, and the smoke chamber against the original manufacturer’s specs before we ever declare the system ready for the season. A typical annual sweep with a Level 1 inspection in Bermuda Run runs about $150-$250. If you need a Level 2 inspection (which adds a video scan of the flue interior), expect roughly $250-$400. A written estimate always sets the final price, and the estimate itself is free.
What a Sweep Actually Covers
We remove soot and creosote from the firebox, the smoke chamber, and the flue, then check that the damper opens and closes cleanly and that the cap is intact. Soot removal and first-degree creosote removal are part of every standard sweep. If we find glazed, hard creosote, that’s a separate job and we’ll tell you plainly before any work begins.
When to Book It
Fall is the busy season, and it’s worth booking before the first burn. If your fireplace has been closed up through a humid summer, a sweep also catches moisture problems before they spread. Homes that burn regularly should schedule one sweep a year.
Gas Fireplace Cleaning in Bermuda Run
Gas fireplace cleaning in Bermuda Run homes is a different job from wood sweeping, and it’s one worth doing even when the firebox looks clean. Gas burners leave behind soot, dust, and a thin film that clogs ports and dulls the flame over time. A typical gas fireplace cleaning here runs about $120-$220; if the inspection uncovers a venting or log-set issue, the written estimate will show what additional work costs before anything gets touched. Many of the factory-built inserts in these homes are gas units, so this is common work for us.
Signs a Gas Fireplace Needs Attention
A weak or uneven flame, a burning smell, or soot buildup around the logs are the usual flags. Unusual odors are worth a look sooner rather than later, since they can point to venting trouble.
What the Cleaning Includes
We clean the burner ports, the glass, and the interior, then check that the venting is clear and the logs sit where the manufacturer intends. We treat it as a system check, not a wipe-down.

Trusted Brands We Service in Bermuda Run
We work with the same professional-grade materials certified chimney technicians specify nationwide, not big-box substitutes. That includes HeatShield, the ceramic sealant system used for liner repair, along with Gelco and Famco chimney caps and dampers built to last. When a factory-built fireplace needs a manufacturer-specific replacement, we match the part to the system rather than forcing a generic fit. We don’t claim to stock parts in town; what we do is source the right component and get it installed without dragging out the job. That keeps turnaround short for Bermuda Run homeowners who want the chimney back in service before burning season.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Bermuda Run Homes
Here’s the thing about Bermuda Run: most of the chimneys here aren’t old masonry. They’re 1980s to 2000s factory-built fireplaces with metal flues and stucco or siding-clad exterior chases. That changes the failure pattern entirely.
- Rusted chase covers on south-facing walls. Summer sun and Piedmont humidity work on the chase covers through the warm months, and rust streaks show up first on the sun-facing side. That rust is usually the first sign moisture is finding its way in, which drags down draft once you start burning again.
- Popped caulk and cracked crowns on stucco chases. Stucco on a framed chase expands and contracts with the seasons, and the caulk lines eventually let go. A hairline crack in the crown is enough to send water down to the damper and firebox, where it does far more damage than it looks like from outside.
- Obsolete factory-built fireplace parts. Dampers and smoke chamber components on older factory-built units can fail or go out of production, which means the replacement has to be matched to the original manufacturer’s specs rather than improvised. That’s where DuraFlex and HeatShield earn their keep on the repair side.
- Water intrusion from failed flashing. Where the chase meets the roofline, flashing takes the brunt of the weather and is a frequent leak point. Left alone, that moisture reaches the firebox and rusts out metal components from the inside.
Pricing for Chimney Sweep in Bermuda Run, NC
We’d rather give you real numbers up front than have you wonder what the visit will cost. A standard annual sweep with a Level 1 inspection in Bermuda Run runs about $150-$250. A Level 2 inspection with a video scan of the flue is roughly $250-$400. Creosote removal beyond a light coating, chimney cap or chase cover replacement, and gas fireplace cleaning are priced separately based on what the chimney actually needs. What moves the price is the condition of the system and the parts required, not the town. The written estimate sets the final price, it’s free, and nothing gets recommended without camera evidence you can see for yourself.
We Also Serve Cities Near Bermuda Run
Bermuda Run sits right in the middle of our service area, so we also work throughout nearby Bermuda Run and the towns around it. That includes Clemmons, Lewisville, Mocksville, and Winston-Salem. Our chimney sweep team covers the whole corridor, so if you’re just outside the community, we can still help. Call (866) 343-2983 to check scheduling.
Serving Bermuda Run, NC – Our Local Coverage Area
We serve Bermuda Run and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Bermuda Run
Even a rarely used factory-built fireplace needs an annual inspection, because the damage here usually comes from outside, not from burning. The stucco-clad chases and metal caps on Bermuda Run’s golf-course homes take on Piedmont humidity and summer sun all year, and rusted covers or popped caulk let moisture reach the firebox whether you light a fire or not. An inspection catches that early. Call (866) 343-2983 for a free estimate.
The cap should match your manufacturer’s specs, and Gelco or a Famco cap are common choices for factory-built systems here. A generic cap that doesn’t fit the chase properly is exactly what lets water in on the south-facing side. We source the correct part rather than forcing a one-size fit. Call (866) 343-2983 and we’ll tell you what your system takes.
Once a year is right for most homes here, and the best time is before the first burn in fall. Homes that burn wood heavily may need a mid-season check, and gas fireplaces benefit from an annual cleaning too. Book ahead, since fall fills up fast. Call (866) 343-2983 to schedule.
Yes, we clean gas fireplaces throughout Bermuda Run, and it’s a regular part of our work given how many factory-built inserts these homes have. We clean the burner ports, glass, and interior, then check the venting. A typical gas cleaning runs about $120-$220. Call (866) 343-2983 for an exact quote.
A Level 2 inspection adds a video scan of the flue interior to the standard Level 1 check, and it’s the right call when you’re buying or selling a home, after a chimney fire, or when something doesn’t look right from the outside. On Bermuda Run’s factory-built chimneys, the video scan is how we confirm the flue and chase components match the manufacturer’s specs. Expect roughly $250-$400. Call (866) 343-2983 for a free estimate.
Written by the team at Jasper Chimney Sweep.