Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across King
If your chimney is pulling apart at the crown, leaking at the flashing, or running a wood stove that’s started smoking back into the room, you need a repair plan built for the way King homes actually burn. We work King regularly, from the wooded lots off the rural roads north of town to the brick ranches closer to Highway 52, and we know what a hard-burning chimney in this corner of Stokes County looks like before we get on the roof. Our technicians have up to 9 years of experience, and we handle inspection, sweeping, and chimney repair as one company, so nothing gets passed to a second contractor. Call (866) 343-2983. We answer 24/7.

Why King Homeowners Call Jasper Chimney Sweep for Chimney Repair
King is a wood-burning town. That single fact shapes almost every repair call we take here. A lot of the homes around King lean on a wood stove or an open masonry fireplace as real heat through the colder months, not as decoration, and chimneys that work hard wear differently than the ones you’d find in a suburban subdivision full of gas logs.
We treat your chimney as a system, not just a dirty flue. That means when we look at a chimney in King, we’re reading the flue liner, the crown, the flashing, the damper, and the smoke chamber together, because a leak at the top and a draft problem down below are usually connected. You get a written understanding of your chimney’s condition from the inspection, not just a cleaning receipt.
Our King customers tend to be homeowners who want the fix done correctly and once. Some are getting ahead of a warning from an insurance carrier. Some are preparing to sell. Most just want the stove to draft right before the cold sets in. The team that inspects your chimney is the same team that sweeps and repairs it, and that accountability is why people call us back.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Flashing Repair in King
Chimney Flashing Repair in King is one of the most common jobs we run here, and it’s almost always water-related. The flashing is the metal that seals the gap where your chimney passes through the roof, and when it pulls loose or corrodes, rain finds the path into the smoke chamber and down through the house. A typical flashing repair in King runs $250 to $650, depending on whether we’re resealing existing flashing, replacing it around a masonry chimney, or reworking it where a wood stove pipe exits the roof.
What flashing work involves here
On a masonry chimney we cut back the old sealant, check the step and counter flashing, and rebuild the seal with new metal and a compatible sealant that holds through freeze-thaw. For a wood-stove pipe penetration, the storm collar and boot get checked and replaced if the rubber or metal has started to fail.
When to call about it
If you see a water stain on the ceiling near the chimney, or find dampness around the flue after a heavy rain, the flashing is the first thing to check. Wait on it and the water reaches the framing and the liner.
Chimney Crown Repair in King
Chimney Crown Repair in King is the other repair we see constantly, because a concrete crown takes the worst of the Piedmont’s freeze-thaw swings. The crown is the concrete cap on top of the chimney that sheds water away from the masonry, and hairline cracks that seem harmless in summer open up when water freezes inside them. A crown repair in King typically runs $350 to $900, with a full rebuild of a badly cracked crown at the higher end.
Repair or rebuild
A crown with surface cracks but sound structure is a repair: we clean it, fill it, and seal it so water runs off again. A crown that’s crumbling, separated from the flue, or spalling in chunks is a rebuild, because patching over failed concrete just postpones the same call.
Spalling brick below the crown
When the crown leaks long enough, the brick just under it starts to spall, and that’s when tuckpointing or mortar repointing enters the job. We repair the crown first so the brick repair actually holds.

Trusted Brands We Service in King
We work with professional-grade chimney industry brands, the same materials certified chimney technicians specify nationwide. For liner repair we use HeatShield, the ceramic sealant system most generalist services don’t carry or know how to apply. For flexible liner systems we install DuraFlex, cut to fit the flue precisely. Gelco and Famco caps and dampers are what we install when the old one has rusted through or warped from hard burning, and Olympia Chimney and Copperfield round out the liner and component work. These aren’t big-box substitutes; they’re the parts built to last. We don’t claim to stock every part locally, but we source fast, and we’ll tell you on the estimate what we’re using and why.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in King Homes
The spine of chimney repair in King is the rural wood-stove retrofit. A freestanding stove dropped into an existing masonry fireplace and vented through a short flue soots up far harder than a full-height chimney, so repair calls here often start with glazed creosote and a tired flue liner rather than a cracked crown. That short-flue, wood-primary pattern is a foothills habit, and it’s the reason a lot of King jobs go straight to liner assessment.
On a wooded King lot where the stove is the main heat source, a short flue off a fireplace-mounted wood stove often builds third-degree creosote and starts drafting poorly by late winter. The usual fix is a Level 2 inspection, then either a HeatShield or poured liner repair to restore the flue, plus a new damper seal and a chimney cap to keep out rain and animals. Where freeze-thaw has opened a crack, the crown and flashing get rebuilt or resealed at the same visit.
- Third-degree creosote in short flues. A stove vented through a short run has less length to cool the smoke, so glazed creosote builds where a brush can’t touch it. That’s a liner problem, not a sweeping problem.
- Freeze-thaw crown and flashing damage. Piedmont swings crack the crown and pull flashing loose from the roof, letting water into the smoke chamber. The water damage usually shows up before the crack does.
- Warped dampers. All-winter burning on a wood-primary property warps dampers faster than light decorative use, and a damper that won’t seal means heat lost up the flue and smoke that won’t draft.
- Degraded older liners. Older masonry fireplaces in King’s brick ranches and farmhouse-style homes often carry liners that have cracked or spalled after years of hard seasonal burning.
Pricing for Chimney Repair in King, NC
Chimney repair in King is priced per job on a written estimate, and the estimate is free. Typical ranges for the work we do here: flashing repair $250 to $650, crown repair $350 to $900, tuckpointing and mortar repointing $400 to $1,200 depending on the area, chimney waterproofing $300 to $700, and a full chimney rebuild at the top end when the structure has failed. Liner repairs using HeatShield or a new DuraFlex liner sit in the middle to upper range, priced by the flue length and the condition of what’s there. A written estimate sets the final price before any work begins, so you know what you’re approving. Call (866) 343-2983 for an exact quote. We answer 24/7.
We Also Serve Cities Near King
We serve homeowners across the area around King, including Tobaccoville, Rural Hall, Lewisville, and Winston-Salem. If you’re just outside King and want the same inspection-and-repair approach, we can help. Call (866) 343-2983. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving King, NC – Our Local Coverage Area
We serve King and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in King
Your stove is vented through a short flue, and a short flue cools smoke fast, which builds creosote faster than a full-height chimney. Wood stoves run as primary heat also burn longer hours than a decorative fireplace, so the buildup compounds. If yours is sooting up quickly, the flue needs an inspection, not just another sweep. Call (866) 343-2983 for an exact quote. Estimates are free.
Third-degree creosote is glazed, hard, and shiny, and it won’t come off with a brush the way normal soot does. You can often see it on the flue walls with a flashlight, but confirming it takes a camera inspection and a Level 2 assessment. Once it’s glazed, it’s a liner repair conversation. Call (866) 343-2983 to book an inspection.
Surface cracks in a sound crown are a repair; a crumbled, separated, or spalling crown is a rebuild. The deciding factor is whether the concrete is still structurally sound under the cracks, which we check on the roof. Either way, it’s cheaper to fix before the brick below starts spalling. Call (866) 343-2983 for an exact quote. Estimates are free.
The flashing seal has failed, and water is finding the gap where the chimney meets the roof. Wind-driven rain and freeze-thaw pull old sealant loose, so the flashing needs resealing or replacing. Left alone, the water reaches framing and the smoke chamber. Call (866) 343-2983. We answer 24/7.
Yes, and arguably more, because a stove run as primary heat burns longer and harder than most fireplaces. The short flue on a King wood-stove retrofit builds creosote faster, so the annual inspection matters more here, not less. Book the inspection before the cold sets in. Call (866) 343-2983. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Jasper Chimney Sweep.