Chimney Repair in Clemmons, NC | Jasper Chimney Sweep

Chimney Repair in Clemmons - Inspected on Camera, Then Priced in Writing

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Clemmons

If your chimney is letting water in, your damper has seized, or a contractor told you the whole stack needs rebuilding, we’re the team to call in Clemmons. We repair the chimneys this town actually has: 1980s to 2010s brick traditionals and neo-colonials with prefab fireboxes and stainless liners, plus the older ranch stock near the village core along Lewisville-Clemmons Road. That distinction matters. A prefab-and-stainless chimney has different failure points than a hand-laid masonry stack, and the repair plan is different too. Our technicians have up to 9 years of experience, and the same team that inspects is the team that sweeps and repairs. Call (866) 343-2983 to book.

professional contractor using angle grinder for chimney masonry repair in Clemmons, NC

Call (866) 343-2983

Why Clemmons Homeowners Call Jasper Chimney Sweep for Chimney Repair

We work in Clemmons often enough to know the pattern. A summer thunderstorm rolls through, water gets past a rusted cap, and by the first cold snap the damper won’t move and there’s a stain on the ceiling around the chase. That’s the most common call we get here, and it’s rarely the emergency it feels like.

What sets our work apart is evidence. Every repair starts with a camera inspection, and you see the footage yourself: the corroded cap, the cracked crown mortar, the liner seam or rust-through. Nothing gets quoted until you’ve watched it on the screen. We treat your chimney as a system, not just a dirty flue, and we use professional-grade materials – the same brands certified chimney technicians specify, like HeatShield for liner repair and Gelco and Famco for caps and dampers.

One company handles the whole loop: inspection, sweeping, and repair. No handoff between a sweeper and a mason, no gap where something gets missed. And when work can safely wait, we say so.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Cap Replacement in Clemmons

Chimney cap replacement in Clemmons is the single most common repair we quote, because a rusted-out or missing cap is what lets Piedmont thunderstorm rain run straight down a prefab stainless liner. The job itself is straightforward: pull the failed cap, check the flue tile and crown underneath, and set a new cap sized and sealed to the flue. We install Gelco and Famco caps built for longevity, not cheap replacements that need re-servicing in two years.

What a Failing Cap Looks Like

Rust streaks down the cap, a loose or missing spark screen, or a cap that’s simply gone after a wind storm. Any of those means water has an open path into the flue during the next heavy rain.

Sealing the Cap to the Flue

A cap only works if it’s sealed where it meets the flue tile. We set the cap with a proper seal so runoff sheds away from the opening rather than wicking back in. It’s a small detail that decides whether the cap lasts.

Chimney Liner Installation in Clemmons

Chimney liner installation in Clemmons usually comes up when a prefab stainless liner has rusted through or a seam has failed, or when an older clay flue isn’t safely venting the appliance now connected to it. We install listed stainless liner systems, including DuraFlex flexible liners for jobs that need a precision fit through an offset flue. Where the existing liner is sound but has cracks or gaps, HeatShield ceramic sealant can repair it instead of replacing it. Not every liner call needs a new liner, and the camera footage tells you which one you’re in. A typical liner installation in Clemmons runs $2,400-$4,800 depending on flue length, liner size and appliance.

Prefab Liner Seams and Rust

Factory-built stainless liners fail at the seams and at the bottom connection, where moisture sits longest. The camera shows it clearly, and you don’t have to take anyone’s word for it.

Clay Flues Venting Modern Appliances

Older ranch homes near the Clemmons village core often have a clay-tile or unlined flue now venting a gas furnace or insert it was never sized for. Those get evaluated on camera before anything is recommended.

Professional construction worker performing chimney crown repair with a power saw in Clemmons, NC

Trusted Brands We Service in Clemmons

We work with professional-grade chimney brands – DuraFlex for flexible liner systems, HeatShield for ceramic liner sealant repair, Olympia Chimney, Gelco, and Famco for caps and dampers. These are the materials certified chimney technicians specify, not big-box substitutes, and they’re what we put into Clemmons chimneys. We don’t claim parts on a truck or inventory sitting in a warehouse; what we do is source the right component for your flue, sized and fitted for the job, and get it installed without the runaround. That includes Olympia Chimney components where a system calls for them.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Chimney Repair Problems We See in Clemmons Homes

  • Rusted or missing rain caps. The Piedmont’s summer thunderstorms find every gap. A failed cap sends water down a prefab stainless liner, and by the first cold snap the damper has seized and the ceiling around the chase is stained.
  • Cracked or spalling chimney crown mortar. Humid summers plus freeze-thaw cold snaps break down crown mortar. Re-crowning is usually the actual repair, even when it gets sold as a full rebuild.
  • Clay-tile or unlined flues venting the wrong appliance. The older ranches near the village core have stacks never designed for a gas furnace or insert. Creosote glazing can hide inside those flues where the homeowner never sees it.
  • Failed prefab liner seams. The 1980s-2010s brick traditionals here have stainless liners that fail at joints and at the bottom connection. Camera inspection is how you find out whether it’s a seam, a section, or the whole liner.

Pricing for Chimney Repair in Clemmons, NC

Here’s what chimney repair typically runs in the Clemmons market. A chimney cap replacement is usually $250-$550 installed. Re-crowning a chase runs $600-$1,400. Spot mortar repair and tuckpointing on a crown or flashing area is typically $400-$900. A full stainless liner installation is $2,400-$4,800, and HeatShield liner sealant repair is commonly $1,200-$2,200 depending on flue length. Flashing repair or rebuild lands around $350-$800.

What moves the number is flue length, liner size, how much masonry has to come apart, and whether the work is at the crown, the chase, or inside the flue. We don’t quote from the driveway. The written estimate sets the final price, and the estimate is free. Nothing is recommended without camera evidence you can see for yourself, and if a repair can safely wait, we’ll tell you that too. Call (866) 343-2983 for an exact quote on your chimney in Clemmons.

We Also Serve Cities Near Clemmons

We serve homeowners across the Winston-Salem area, including Clemmons and the surrounding communities of Bermuda Run, Lewisville, Winston-Salem, and Midway. The housing stock shifts as you cross those lines – more older masonry in Winston-Salem proper, newer subdivisions out toward Bermuda Run – and the repair plan shifts with it. If you’re in any of those towns, our chimney repair service covers the same camera-first process.

Serving Clemmons, NC – Our Local Coverage Area

We serve Clemmons and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Clemmons

Why Clemmons Chooses Jasper Chimney Sweep

We set the standard for chimney repair in Clemmons.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Clemmons

Getting your chimney repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Clemmons Customers Say

Trusted by homeowners across Clemmons and surrounding areas.

★★★★★

"Fast, fair, done right. No notes."

Farah Saleh
★★★★★

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

Lisa Reed
★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Mark Rhodes

Ready for Chimney Repair in Clemmons?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Clemmons.

(866) 343-2983

Request a Free Estimate in Clemmons

Tell us about your chimney repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - We Answer 24/7