Chimney Repair in Winston-Salem, NC | Jasper Chimney Sweep

Chimney Repair in Winston-Salem - Inspected on Camera, Then Priced in Writing

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Repair for Winston-Salem Homeowners

Most chimney problems in Winston-Salem start small: a hairline crack in the crown, a loose flashing edge after a hard Piedmont thunderstorm, a cap that walked off in the wind. Left alone, any of those turns into water inside the flue and masonry that keeps getting more expensive to fix. Jasper Chimney Sweep handles chimney repair as a full system, not a patch on the visible part. Our technicians have up to 9 years of experience, and we bring the same professional-grade materials certified technicians specify: HeatShield for ceramic liner repair, DuraFlex for relining, and Gelco or Famco caps and dampers. We inspect, sweep, and repair under one roof, so the team that finds the problem is the team that fixes it. Same-day service is often available in Winston-Salem. Call (866) 343-2983 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.

Call (866) 343-2983

Chimney Cap Installation

Chimney Cap Installation fits a protective cover and spark screen over the flue opening, and it’s the single cheapest way to keep rain, birds, and squirrels out of a Winston-Salem chimney. You need one when the flue is open at the top, when you’re hearing animals in the chimney, or when rain is spitting down onto the smoke shelf. We install Gelco and Famco caps built to stay put through wind and weather, sized to the actual flue rather than a universal fit that rattles loose. Typical chimney cap installation runs $250-$600 depending on flue count and whether a custom size is needed. Every job starts with a free written estimate, and the price is set by that estimate, not the visit.

Stainless Caps and Animal Guards

Stainless steel caps outlast painted ones and don’t rust through in damp weather. We add animal guards on top of the screen so small wildlife can’t pull the mesh loose and climb in. The cap still lets smoke vent freely, since a blocked flue is its own problem.

Custom Caps for Odd Flue Shapes

Older Winston-Salem homes don’t all have a single round flue. Multi-flue stacks and rectangular openings need a cap built to the measurements. We take the dimensions on site so the cap seals without gaps around the edges.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Cap Replacement

Chimney Cap Replacement is for a cap that’s rusted, bent, missing, or simply too small for the flue it’s supposed to cover. You need it when you see flaking paint and holes in a steel cap, when the screen is torn, or when a storm has knocked the cap askew and it no longer sheds water the way it should. A loose cap lets rain and debris down the flue and can peel off in high wind, so it’s one of those small repairs worth doing before it becomes a liner issue. We swap in Gelco and Famco caps chosen for the flue and the local weather. Typical chimney cap replacement runs $200-$550 depending on the cap and the size of the opening, and the written estimate keeps the price clear before we start.

Signs a Cap Has Failed

A cap that has lost its coating, warped, or corroded through is done for. Rust streaks down the chimney crown and water stains inside the firebox usually point back to the cap. If the screen sags or separates, animals can get in.

Matching the Cap to the Flue

A cap that’s too large or too small performs worse than one that fits. We measure the flue and the crown so the new cap seats correctly and seals at the edges. That fit is what keeps rain out and keeps the cap on through wind.

Chimney Liner Installation

Chimney Liner Installation puts a new flue lining inside the chimney to contain heat and combustion gases, and it’s the repair that matters most for how safely the chimney drafts. You need it when the existing clay tile liner is cracked, spalled, or missing, or when you’ve upgraded to a new appliance that the old flue wasn’t sized for. Damaged liners let heat reach the surrounding framing and let gases escape into the house, so this isn’t a job to leave. We install DuraFlex flexible liner systems, chosen for the chimney’s dimensions and the appliance it serves, along with HeatShield ceramic sealant for liners that can be restored rather than replaced. Typical liner work runs $2,000-$6,500 depending on length, flue size, and whether a full replacement or HeatShield repair is the right call.

Why a Cracked Liner Can’t Wait

A cracked flue liner loses its job of containing heat and gases. Gaps in the clay tile let heat reach nearby wood framing, and they let combustion gases move into the home instead of up the flue. This is a repair a trained professional should handle, not a do-it-yourself project.

Repair Versus Full Relining

Not every damaged liner needs pulling out. When the tile is intact enough, HeatShield ceramic sealant can restore the flue from the inside and give it a smooth, sealed surface again. When the liner is beyond saving, DuraFlex handles the replacement.

Chimney Flashing Repair

Chimney Flashing Repair reseals the metal that joins the chimney to the roof, and it’s the usual culprit when water shows up on a ceiling near the chimney. You need it when you see rusted or lifted flashing, staining on the masonry below the roofline, or daylight where the flashing meets the shingles. Storm-driven rain and seasonal temperature swings in the Piedmont work flashing loose over time, and a small leak becomes rotted decking and ceiling damage if it’s ignored. We lift and reset the flashing, seal it correctly, and confirm the joints at the roof and the chimney both hold. Typical chimney flashing repair runs $350-$900 depending on the roof pitch and how much flashing needs replacing. This usually involves working on the roof at height, so it’s a job for a trained technician.

Where Water Gets In

The flashing joint is the most common source of chimney leaks. Water finds the smallest gap where the metal meets the masonry and works its way in behind it. Resealing isn’t enough if the flashing has corroded through; it has to be replaced.

Working With the Roof Pitch

Steep roofs need flashing installed so it laps and drains correctly, not just sits flat. We form and seat the flashing to the actual slope so it sheds water instead of trapping it. The seal at the chimney and the shingles both matter.

Chimney Crown Repair

Chimney Crown Repair fixes the concrete cap at the very top of the chimney that sheds water away from the masonry below. You need it when the crown has cracks, crumbling edges, or a flat surface that pools rather than drains. Water that gets through a cracked crown soaks into the brick and mortar, then freezes and thaws through winter, and that cycle is what turns a crown crack into deeper masonry damage. We remove the failed crown and rebuild it with a slight slope so it drains properly, then seal it against weather. Typical chimney crown repair runs $400-$1,200 depending on the size of the crown and how much needs rebuilding. We handle the work and include what we found in your written report.

Why a Crown Cracks

Concrete at the top of a chimney takes everything the weather throws at it, and a flat or undersized crown holds water instead of shedding it. The repeated freeze and thaw drives cracks wider and breaks down the edge. Rebuilding with the correct slope and overhang is what makes the repair last.

Rebuilding Versus Sealing

A sealer can slow down a crown that’s still mostly sound, but it won’t hold a crown that’s cracked through and crumbling. When the crown has failed, rebuilding is the fix. We tell you which one your crown actually needs before any work starts.

Chimney Repair Companies

Chimney Repair Companies in the area vary widely in what they actually do, and knowing what to look for is the difference between a repair that lasts and one that comes back. You need to be choosy when a quote includes liner work, masonry, or a full relining, and when generalist handymen and one-trick sweeps are quoting the same thing at very different numbers. Jasper Chimney Sweep handles inspection, sweeping, and repair in-house, so nothing gets handed off between contractors. We work with professional-grade brands like DuraFlex, HeatShield, Gelco, and Olympia Chimney, the same materials certified technicians specify. Costs across Winston-Salem chimney repair companies run from a few hundred dollars for a cap repair to several thousand for a full relining. The free written estimate tells you exactly what’s being priced.

Questions to Ask Before You Hire

Ask what the crew will actually do and what material goes in. Ask whether the company does its own inspection and whether you’ll get a written report. If a quote only appears after a sales pitch, ask for it in writing before any work starts.

Why One Company, One Standard Helps

When inspection, sweeping, and repair come from different outfits, the handoff is where things fall through. One company working from inspection to repair keeps the details straight. It also means you have one number to call if a question comes up.

Chimney Masonry Repair

Chimney Masonry Repair restores the brick and mortar of the chimney itself, which is what’s left holding the whole stack together after years of weather. You need it when mortar joints have gone crumbly, when brick faces are spalling and flaking, or when the chimney above the roofline shows gaps between courses. Loose mortar lets water in, and water in masonry means freeze-and-thaw damage that grows each season. We repoint the joints, replace spalled brick, and seal the finished masonry. Typical chimney masonry repair runs $500-$2,500 depending on the extent of the repointing and how many bricks need replacing. Every job gets a free written estimate so you know what’s being done and why before it starts.

Repointing Mortar Joints

Crumbling mortar is the first sign that a chimney stack needs attention. Repointing cuts out the failed mortar and packs in new mortar matched to the original so the joints stay tight and shed water. Done right, repointing adds years to the existing brick.

Spalled Brick and How We Handle It

Spalled bricks have faces that are peeling and flaking off, often because they absorbed too much water. Those bricks get cut out and replaced with similar brick so the color and texture stay consistent. The result is a chimney that looks repaired on purpose, not patched.

Brands We Service

We work with professional-grade chimney brands, and we know each one’s strengths well enough to pick the right material for the job. HeatShield is the ceramic sealant we use for liner restoration, and it’s the fix when the flue can be sealed from the inside rather than replaced. DuraFlex is the flexible liner system we install when a damaged liner has to come out, sized for the specific flue and appliance. We also install Gelco and Famco caps and dampers built for longevity, not cheap swaps that come back next season for the same fix.

Copperfield and Olympia Chimney round out the materials we work with, and both have earned the confidence of certified technicians who rely on them for liners and chimney components. Whether your home has HeatShield-sealed flue work, a DuraFlex liner, or a Gelco or Famco cap that has seen better days, we can help. If you don’t know what’s on your chimney, the inspection tells us.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Signs You Need a Pro Right Now

  • Water stains on the ceiling or around the firebox. A stain that shows up near the chimney usually traces back to flashing or a cracked crown. Water in the wrong place can reach framing if it’s left long enough.
  • Crumbling mortar joints on the chimney exterior. Joints that crumble away let water soak into the brick, and that water expands when it freezes. Repointing early is cheaper than rebuilding later.
  • A strong or smoky smell with the damper closed. That smell often comes from a damaged liner or a flue that can’t vent correctly. It’s worth having looked at before the next fire.
  • Cracked or missing cap, or torn screen. An open flue is an invitation for rain, animals, and debris. A damaged cap also stops shedding water the way it should.
  • A white, chalky stain on the brick (efflorescence). This is mineral salt left behind by water moving through the masonry. It’s a sign that moisture is getting in somewhere it shouldn’t.

Our Process, Step by Step

  1. 1
    Book an inspection. We take the details of what you’re seeing and set an appointment. The inspection is the start of understanding your chimney as a system, not just the visible part.
  2. 2
    Camera inspection and written report. We inspect the flue and the exterior, and take photos so you can see what we see. The report tells you what needs doing and what can safely wait.
  3. 3
    Free written estimate. We price the work per job and put it in writing. Nothing gets recommended without camera evidence, and nothing gets done without your approval.
  4. 4
    Sweep and repair under one roof. The team that inspected does the repair, using HeatShield, DuraFlex, or the cap brand chosen for the job. One crew, one standard of work.
  5. 5
    Final check and photo report. We confirm the repair is right and send you the photos and notes so you have a record. If a follow-up item can wait, the report says so.

How Much Does Chimney Repair Cost in Winston-Salem?

Chimney repair in Winston-Salem runs from a couple hundred dollars for a cap or flashing fix up to several thousand for a full relining, and the range depends on what’s actually wrong. A typical chimney cap replacement in Winston-Salem runs $200-$550 depending on the cap and flue size. Chimney crown repair runs $400-$1,200, flashing repair $350-$900, and liner work $2,000-$6,500 when a full relining or HeatShield sealant restoration is needed. Masonry repointing and brick replacement run $500-$2,500. Several things move the number: the size of the chimney, how long the damage has gone on, whether we’re working above the roofline, and which materials the repair calls for.

To avoid overpaying, get a written estimate that names what’s being done and what material goes in, and don’t approve work based on a brochure. A free estimate with Jasper includes the inspection, the camera photos, and a line-by-line description of what’s recommended and why. Nothing gets recommended without camera evidence you can see for yourself, and we say plainly when a repair can safely wait. That’s what keeps the price honest. Call (866) 343-2983 for an exact quote – estimates are free.

Our Service Area Near Winston-Salem

We provide chimney repair across Winston-Salem and the surrounding towns, including Clemmons, Lewisville, Rural Hall, Midway, Tobaccoville, Bermuda Run, King, Welcome, and Lexington. Homes in these areas see the same seasonal swings that wear on masonry and flashing, so the repair work looks familiar. For nearby communities we offer chimney repair and chimney repair with the same inspection-first approach. Call (866) 343-2983 to set your appointment.

Serving Winston-Salem, NC – Our Local Coverage Area

We serve Winston-Salem and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Chimney Repair in Winston-Salem

Schedule Your Chimney Repair Service in Winston-Salem Today

If your chimney has a cracked crown, a failing cap, or a liner that needs a closer look, book an inspection and get a written understanding of what it needs. Call Jasper Chimney Sweep at (866) 343-2983 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm. Start with Jasper Chimney Sweep and we’ll take care of the chimney repair from there.

Written by the team at Jasper Chimney Sweep.

Why Winston-Salem Chooses Jasper Chimney Sweep

We set the standard for chimney repair in Winston-Salem.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Winston-Salem

Getting your chimney repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Winston-Salem Customers Say

Trusted by homeowners across Winston-Salem and surrounding areas.

★★★★★

"Fast, fair, done right. No notes."

Farah Saleh
★★★★★

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

Lisa Reed
★★★★★

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

Mark Rhodes

Ready for Chimney Repair in Winston-Salem?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Winston-Salem.

(866) 343-2983

Request a Free Estimate in Winston-Salem

Tell us about your chimney repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - We Answer 24/7