Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Winston-Salem Homeowners Choose Gelco Chimney Cleaning
We provide independent Gelco chimney cleaning service in Winston-Salem, which means we inspect, sweep, and service Gelco chimney caps, top-sealing dampers, and stainless liner kits without being tied to the manufacturer. What sets our Gelco work apart is that we treat the cap, damper, and liner as a connected system rather than isolated parts. Winston-Salem’s older masonry homes have specific habits when it comes to Gelco components, and we know them well.
To be clear up front: Jasper Chimney Sweep is not affiliated with, authorized by, or a dealer for Gelco. We’re an independent service provider. That independence works in your favor. We repair and service Gelco equipment with quality parts that fit it, and we tell you honestly when a Gelco part can be cleaned and kept versus replaced. Our technicians have up to 9 years of experience working on Gelco-equipped chimneys across Winston-Salem. Call (866) 343-2983 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Jasper Chimney Sweep for Your Gelco Chimney Cleaning?
Gelco makes a small, focused range of chimney products: top-sealing dampers, stainless flexible liner kits, multi-flue and single-flue chimney caps, and fireplace glass door and spark screen sets. Because we work on all four kinds regularly, we’ve learned the fit details that matter. A Gelco top plate seats a certain way. The damper lid needs to travel flat against the gasket to seal. The appliance collar adapter has its own clearance habits. None of that is guesswork for us.
We use quality parts that fit your existing Gelco assembly, whether that’s a replacement damper gasket, a top plate, an appliance adapter, or cap hardware. Matching the part to the assembly keeps your seals and clearances where they belong. Generic aftermarket dampers often won’t seat the same way as the lid they’re replacing, and that shows up as a cold draft or a chimney that leaks air when closed.
Warranty-safe service matters here. We work to preserve the sound parts of your Gelco assembly rather than tearing out what doesn’t need to come out. When we do replace something, we document what we found and why. You know what your chimney needed before any work began. Our customers in Winston-Salem get sweeping, repair, and inspection handled by the same team, so the technician who inspects is the one who sweeps and repairs.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Fix in Winston-Salem
Gelco products are built for longevity, but they live in a working chimney. Here are the issues we see most often on Gelco-equipped chimneys around Winston-Salem, and what causes each one.
- Top-sealing damper gasket flattening. The gasket under a Gelco top-sealing damper compresses over time and eventually goes flat, so the lid no longer seals tight. That means the chimney drafts, leaks air when closed, and lets conditioned air escape. It’s the most common complaint we hear, and a fresh gasket usually restores the seal.
- Spring and linkage binding. Soot and creosote build up on the damper frame and the linkage that opens and closes the lid. The spring loses its snap and the cable or handle stops moving freely. Left alone, a hard-to-open damper discourages the annual sweep that keeps the whole system healthy.
- Liner kit joint and top plate loosening. On Gelco stainless flexible liner kits, the joints and the top plate connection can work loose over years of heating and cooling. Creosote and moisture then migrate behind the liner, which is a problem you want caught early.
- Appliance collar adapter corrosion. The collar adapter that connects the liner to the appliance corrodes faster than the liner itself because it sits close to heat and moisture. A corroded adapter is a weak point in the whole venting path and needs to be evaluated in person.
- Cap screening rust-through and legs pulling loose. On Gelco chimney caps, the screen mesh rusts through and the cap legs can pull loose at the crown. Rain, birds, and debris get into the flue, and in Winston-Salem’s heavy fall leaf drop, a clogged screen and spark arrestor is a real headache. A screen that’s rusted shut also blocks inspection views from the top.
One thing ties these together: most of them show up first as a symptom you can feel, not see. A cold draft with the damper shut. A handle that won’t pull. A cap screen that won’t let anything through. That’s why we inspect the whole assembly during a sweep instead of just running a brush and leaving.
Gelco Parts & Our Repair-vs-Replace Approach
We don’t stock OEM or genuine Gelco parts, and we’re not a Gelco dealer. What we do is source quality parts that fit your existing Gelco assembly so the clearances and seals stay correct. For a damper gasket, a top plate, an appliance adapter, or cap hardware, matching the part to the assembly is the whole game. A generic aftermarket damper often won’t seat the same way as the lid it’s replacing, and that shows up fast as a bad seal.
Where a Gelco damper or cap is structurally sound, cleaning, re-gasketing, and hardware replacement usually beat replacement. When a liner or cap has failed at the joint or the crown, honest replacement is the right call, and we’ll tell you so plainly. No pressure, no upselling. The written estimate sets the final price before any work starts.
That’s the approach a lot of Winston-Salem homeowners tell us they were looking for: a technician who’ll say “this can wait” when it can. Call (866) 343-2983 to talk through your Gelco assembly and get a free estimate.
Our Gelco Service Process – Step by Step
Here’s how a Gelco service visit usually runs, from first look to final check.
- 1
Diagnosis. We start at the top and the bottom. The Gelco cap and top-sealing damper get checked from the roof, and the liner connections and appliance adapter get checked from below. We document what we find with photos you can see for yourself.
- 2
Repair or install. Based on the diagnosis, we either clean and service what’s there or install replacement parts that fit your Gelco assembly. A common repair is re-gasketing a top-sealing damper and replacing worn linkage hardware. For a liner, we address the joint and top plate connection rather than guessing.
- 3
Test. We confirm the damper lid seats flat against the gasket and the handle moves freely. We check that the cap screen is clear and seated at the crown. We confirm drafts are where they should be with the damper shut.
- 4
Warranty. We document the parts and work so your records are clean and warranty-safe. If a part was replaced, you’ll know the make, location, and reason in plain terms.
We treat your chimney as a system, not just a dirty flue. That matters on a Gelco assembly because the damper, cap, and liner all affect each other.
See the difference
Before
After
Before
After
Before
AfterGelco Products We Service & Install in Winston-Salem
We service and install the kinds of Gelco products found on Winston-Salem chimneys. For each, the goal is the same: keep the parts working as designed and only replace what’s actually failed.
- Gelco top-sealing damper. Cleaning, re-gasketing, linkage repair, and hardware replacement. The most common sub-service here is damper repair on a lid that no longer seals flat.
- Gelco stainless steel flexible chimney liner kits. Inspection and service on the liner, joints, top plate, and appliance collar adapter.
- Gelco multi-flue and single-flue chimney caps. Cap replacement, screen repair, and leg re-seating at the crown. Cap replacement is often the fastest way to solve a rusted or loose screen.
- Gelco fireplace glass door and spark screen sets. Cleaning and service as part of a full sweep.
Every Gelco visit pairs with a full-system inspection, so you get a written understanding of your chimney’s condition rather than just a cleaning receipt.
We Also Service These Brands
Gelco is one part of the picture. We also work with DuraFlex flexible liner systems for relining jobs that need a precision fit, and with HeatShield, the ceramic sealant system used for liner repair. We handle Olympia Chimney, Famco, and Copperfield too. That means one company can service whatever’s actually on your chimney, no matter which brand the last installer chose. You don’t have to call around to find the right specialist in Winston-Salem.
FAQs – Gelco Chimney Cleaning Service in Winston-Salem
No. We’re an independent Gelco service provider, not authorized by, affiliated with, or a dealer for Gelco. We service Gelco equipment with quality parts that fit it, and we’re upfront about that. If you need warranty work or a genuine replacement through the manufacturer, we’ll tell you to go that route.
Yes. Servicing a Gelco top-sealing damper fits naturally into a routine sweep. We clean the flue, then check the damper lid, gasket, frame, and linkage. If the gasket is flattened or the linkage is binding, we handle that during the same visit rather than making a second trip. Call (866) 343-2983 to book a sweep.
A Gelco chimney cap screen rusts out because it sits in constant contact with moisture, flue gases, and weather. In Winston-Salem’s humid climate and damp springs, the screen goes before the cap legs do. Heavy fall leaf drop clogs the screen, holds moisture against the mesh, and speeds up the rust. Cap replacement or screen repair solves it.
It’s usually both. A Gelco handle that won’t pull closed typically has soot and creosote binding the hinge and linkage, sometimes with a hardened gasket underneath. Cleaning clears the frame and linkage; repair means replacing the gasket and any worn hardware so the lid seats flat again. An in-person look tells us which.
Yes. A Gelco stainless liner needs its joints and top plate connection checked during cleaning, not just the flue interior. The appliance collar adapter is a common corrosion point, and a loosened joint lets creosote and moisture migrate behind the liner. We look at the whole assembly, not just what a brush reaches. Call (866) 343-2983 for a free estimate.
A Level 2 inspection is typically called for when a liner or damper is installed or replaced, or when a property changes hands. It gives you a documented look at the whole flue and the connections, which matters on a Gelco assembly. We can discuss what your situation needs during the estimate. Call (866) 343-2983.
Gelco chimney cleaning in Winston-Salem is priced per job by a written estimate, so the final number depends on what the sweep and inspection actually find. Add a damper re-gasket or cap screen repair and the scope grows, but you’ll see it in writing first. Call (866) 343-2983 for a free estimate. Estimates are free.
Book Your Gelco Service in Winston-Salem, NC
If you’ve got a Gelco cap, damper, or liner on your Winston-Salem chimney and something feels off, we can help. Cold drafts, a stubborn handle, a rusted screen: those are the symptoms we know how to trace. Call (866) 343-2983 for a free estimate. We answer 24/7 with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Jasper Chimney Sweep.