Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Winston-Salem?
Chimney cap and crown work in Winston-Salem typically runs from $185 to $375 for a standard cap installation and $450 to $1,600 for crown repair or rebuild, with most single-family homes landing in the $600 to $900 range when both are addressed together. Replacement caps for a single flue usually cost less than a multi-flue masonry cap, and a full crown rebuild on a damaged chimney sits at the top of the range. The written estimate sets the final price, and we give that estimate free before any work begins.
A chimney cap and crown are two separate pieces of the same weatherproofing system, and homeowners often get them confused. The cap sits on top of the flue, screening out rain, animals, and sparks. The crown is the concrete or mortar slab that slopes away from the flue at the top of the chimney, shedding water off the masonry below. Both fail on the same schedule here in the Piedmont, where freeze-thaw swings in January and February crack mortar joints and summer humidity works at the same seams from the other direction. This page breaks down what each repair costs in Winston-Salem, what pushes the number up or down, and how to tell whether you’re looking at a cap problem, a crown problem, or both.
Chimney Cap & Crown Cost Breakdown (2026)
The table below reflects typical ranges for the Winston-Salem market. Every job is different, but these numbers cover the common scenarios we see on single-family homes across the city.
| Work | Typical Range | What It Covers |
|---|---|---|
| Standard single-flue cap (Gelco or Famco) | $185 – $375 | Stainless or galvanized cap sized to the flue, with mesh screen and mounting |
| Multi-flue masonry cap | $550 – $1,100 | Larger cap covering two or more flues on a shared crown |
| Custom-fabricated cap | $800 – $1,600 | Non-standard flue sizes, unusual crown shapes, or custom screening |
| Cap replacement (remove old, install new) | $250 – $500 | Includes removal and disposal of a rusted or damaged cap |
| Crown repair (patch cracks, reseal) | $450 – $850 | Sealing hairline cracks, patching spalled sections, edge repair |
| Crown rebuild (full replacement) | $950 – $1,600 | Removing failed crown, forming a new overhang, pouring new concrete with proper slope |
| Crown + cap combined | $600 – $1,900 | Most common full weatherproofing job on an older Winston-Salem chimney |
What pushes you toward the top of that table? Crown overhang. A crown is supposed to project past the masonry by a couple of inches with a slope that throws water clear of the chimney walls. Many older chimneys in Winston-Salem were built with a flush crown that sits even with the masonry, which lets water run straight down the sides. Rebuilding that crown with a proper overhang takes more forming work than patching cracks, so it costs more up front and prevents a much larger repair later. Cap cost swings on the number of flues and whether the existing cap can be re-used. A rusted cap on a single flue is the cheapest scenario. A custom cap on an odd-sized flue from a mid-century ranch adds fabrication time.
Our technicians have up to experience with these jobs, and we install Gelco and Famco caps and dampers because they hold up to the freeze-thaw cycles this region sees without the rust-through that cheap big-box caps show within a couple of seasons. We also carry HeatShield, DuraFlex, Olympia Chimney, and Copperfield for related chimney work, so a cap-and-crown estimate often comes alongside a full condition report on the rest of the system.
What Affects Chimney Cap & Crown Pricing in Winston-Salem
No two chimneys price the same. These are the factors that move the number most in Winston-Salem and the surrounding Triad.
- Number of flues. A single-flue cap is the base price. Every additional flue adds material and screening. Many older homes in neighborhoods like Buena Vista and Ardmore have two flues (one for the fireplace, one for a furnace or water heater), which pushes cap cost into the multi-flue range even though it’s still a standard cap.
- Crown condition. Hairline cracks that can be sealed are a repair. Spalled concrete, missing overhang, or a crown that’s separated from the flue is a rebuild. The gap between the two is often $500 or more, and it’s the single biggest swing in the estimate.
- Roof pitch and access. A steep roof or a chimney on a tall gable takes longer to set up safely, and that labor shows up in the estimate. Flat or walkable roofs keep it lower.
- Masonry condition. If the crown failed because the top course of brick is spalling or the mortar joints are washed out, we flag it in the estimate. Patching a crown over failing brick is a short-lived fix, and we’d rather show you both numbers than sell you the wrong one.
- Material choice for the cap. Stainless steel costs more than galvanized up front and lasts considerably longer in a humid climate. Gelco and Famco caps are built for longevity, not the cheap replacements that need re-servicing in two years.
- Local code and permit requirements. Crown rebuilds on a masonry chimney sometimes trigger a permit depending on the scope. Ask the city of Winston-Salem’s building department about your specific job before work begins. We’ll tell you what we know, but the final word is theirs.
One more factor worth mentioning: the Piedmont’s climate. Winston-Salem sits at the edge of the mountains and the coastal plain, and that puts the city in a pocket where winters swing hard between freezing nights and mild days. Water gets into hairline cracks, freezes, expands, and pries them wider. Over a few seasons, a crown that looked fine becomes a crown that’s actively failing. That freeze-thaw cycle is the main reason crown work here is a real recurring need, not a once-in-a-lifetime repair.
Is a Cap or a Crown More Important to Fix First?
Fix the crown first if both are failing, because a bad crown is doing more damage to the chimney structure than a missing cap. A crown that’s letting water into the masonry damages the brick, the mortar, and eventually the flue liner, and those repairs cost far more than the crown itself. A missing cap is a serious problem too (rain down the flue, animals nesting, sparks on the roof) but the damage it causes is usually confined to the flue and firebox rather than the whole chimney. In practice, we usually price both together because the crew is already on the roof and setting up once costs less than setting up twice.
How to Save on Chimney Cap & Crown
There’s no coupon code for a crown rebuild, but there are real ways to keep the number down.
- Fix cracks while they’re still cracks. A $450 crown repair today beats a $1,400 crown rebuild next spring. The freeze-thaw window in Winston-Salem is short enough that delaying a repair by one winter season can double the scope.
- Bundle cap and crown in one visit. The setup, ladder work, and safety gear are already in place for the crown. Adding the cap to the same visit typically saves $80 to $150 versus booking them separately.
- Get a full-system inspection first. A proper chimney inspection shows whether the crown is the only issue or whether failing brickwork is the real problem. Knowing that before you commit to a number keeps you from paying twice.
- Choose stainless over galvanized for the cap. The up-front difference is small. The longevity difference is not. A Gelco or Famco stainless cap on a properly sized flue is a one-time purchase.
- Ask for a written scope, not just a number. The estimate should say what’s being removed, what’s being installed, and what’s excluded. A number without a scope is a number you can’t compare to another bid.
Estimates are free, and we’ll walk the roof with you (or send photos if you can’t be there) so you know exactly what’s being priced. Call (866) 343-2983 to schedule yours. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What’s Involved in a Cap and Crown Job?
Homeowners often want to know what actually happens on the roof so they can judge a bid fairly. For a cap replacement, the technician removes the old cap, checks the flue tile for cracks at the top, cleans the mounting surface, and installs the new cap sized to the flue. The mesh screen is sized to keep out squirrels and birds without choking draft. A crown repair involves cleaning out the cracks, filling them with a flexible sealant rated for masonry, and checking the slope. A crown rebuild is a bigger job: the old crown is broken out, the top course of brick is inspected, a form is built to create the proper overhang and slope, and new concrete is poured and finished. The crown needs time to cure before it’s fully weathertight, and we’ll tell you what to expect during that window.
On the inspection side, every sweep we do includes a full-system inspection, and that’s where a cap and crown problem usually surfaces. We photograph the top of the chimney, note the condition of the crown, cap, flue tiles, and any flashing, and give you a written understanding of what the chimney needs. Not a cleaning receipt. A report you can act on. That’s the difference between treating the chimney as a system and just running a brush through the flue.
If the inspection uncovers a liner problem underneath the crown issue, we handle that too. HeatShield ceramic sealant is the industry’s premier liner repair system, and most generalist services don’t carry it or know how to apply it. DuraFlex flexible liner systems handle relining jobs that need a precision fit. Because we inspect, sweep, and repair under one roof, nothing falls through the cracks between contractors. The team that inspects is the same team that sweeps and repairs.
When Should You Replace a Chimney Cap Instead of Repairing It?
Replace the cap when the metal has rusted through, the screen is torn or missing, or the cap no longer fits the flue properly. Repair makes sense only for a loose mount or a bent screen on an otherwise solid stainless cap. Galvanized caps that show rust streaks are usually past the point of a worthwhile repair, because the rust is coming from inside the metal, not just the surface.
A cap that’s doing its job protects the flue from rain, keeps animals out, and stops sparks from landing on the roof. When it fails, the flue takes the damage. Call (866) 343-2983 for a free estimate before small cap damage becomes a liner problem.
Does a Chimney Cap or Crown Repair Need a Permit in Winston-Salem?
Cap installations generally don’t require a permit. Crown repairs and rebuilds sometimes do, depending on the scope and whether structural masonry is being altered. The safest answer is to ask the city of Winston-Salem’s building department directly about your address and your specific scope. We’ll tell you what we know from experience, but the building department’s answer is the one that counts. If a permit is needed, the cost of the permit should be listed as a separate line on your estimate, not folded into the labor.
We work with six professional-grade chimney brands (DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield), and we treat every job as a system-level repair, not a patch. That means if a crown rebuild is on the table, we’re also checking the flashing, the flue tiles, and the damper. A crown is only as good as the chimney it sits on.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Winston-Salem?
A standard single-flue chimney cap in Winston-Salem typically costs $185 to $375 installed, with multi-flue masonry caps running $550 to $1,100 and custom-fabricated caps $800 to $1,600. The written estimate sets the final price. Call (866) 343-2983 for an exact quote. Estimates are free.
How much does chimney crown repair cost in Winston-Salem?
Crown repair in Winston-Salem typically costs $450 to $850 for crack sealing and patching, and $950 to $1,600 for a full crown rebuild with a proper overhang and slope. The rebuild costs more up front but prevents water from running down the masonry. Call (866) 343-2983 to find out which one your chimney needs.
Is it cheaper to repair or replace a chimney crown?
Repair is cheaper ($450 to $850) when the crown has hairline cracks but the concrete is otherwise sound. Replacement ($950 to $1,600) is cheaper in the long run when the crown has spalled, lost its overhang, or separated from the flue, because patching a failing crown usually buys one or two seasons at best. A free inspection tells you which category you’re in. Call (866) 343-2983.
Can you fix a chimney cap or crown the same day?
A cap replacement can often be done the same day the estimate is approved, since it’s a straightforward install and the materials are standard sizes. Crown repairs depend on cure time and weather. Crown rebuilds are usually scheduled as a separate visit so the form and pour can be done properly. Call (866) 343-2983 to check availability. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
How long does a chimney cap or crown last?
A stainless steel Gelco or Famco cap typically lasts 15 to 20 years or more with normal weather exposure, while galvanized caps often rust through in 5 to 10. A properly built concrete crown with a correct overhang and slope usually lasts 20 years or longer. The failing crowns we see in Winston-Salem are almost always the flush, no-overhang type that lets water sit on the masonry. Call (866) 343-2983 to have yours looked at.
Why Choose Jasper Chimney Sweep for Cap & Crown Work
We handle chimney sweeping, chimney repair, and chimney inspection as one company, so the person who tells you the crown is failing is the same person who fixes it. That matters when you’re comparing bids. A generalist handyman can pour concrete on a chimney, but crown work is a chimney-specific job with a specific set of failure modes, and the material choice matters. We install Gelco and Famco caps and dampers, use HeatShield for liner repair where it applies, and fit DuraFlex liners on relining jobs that need precision. The materials are the same professional-grade brands certified chimney technicians specify, not the big-box substitutes that need re-servicing in two seasons.
Our technicians have up to experience. We’re licensed and insured, and we back our work with a satisfaction guarantee. When we’re on your roof, we’re treating your chimney as a system, not just a dirty flue, because a crown repair on top of failing brick is a job that comes back. We’d rather show you the whole picture up front.
Serving Winston-Salem and the surrounding Triad. Whether you’re preparing to sell a home, responding to an insurance carrier’s letter about chimney maintenance, or just noticed water staining at the top of the firebox, a free estimate is the place to start.
Contact Jasper Chimney Sweep
Call (866) 343-2983 for a free chimney cap and crown estimate in Winston-Salem. We’ll inspect the top of the chimney, photograph what we find, and give you a written scope with a clear price before any work begins. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. You can also learn more about Jasper Chimney Sweep and our full range of chimney services, or read about our work across Winston-Salem.
Pricing reflects the Winston-Salem market as of 2026. Jasper Chimney Sweep offers free estimates – call (866) 343-2983.
Written by the team at Jasper Chimney Sweep.
What Our Customers Say
"Fast, fair, done right. No notes."
- Farah Saleh"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Lisa Reed"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Mark Rhodes