Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Winston-Salem?
Chimney repair in Winston-Salem typically runs $250 to $1,200, with most common fixes landing in the $350 to $750 range. Repointing a crown, replacing a cap, sealing a few cracked flue tiles, or patching mortar joints are the jobs we quote most often. Larger work, like a full stainless liner install or a chimney rebuild, starts around $1,800 and climbs to $6,000 or more. Our estimates are free, and the written estimate we leave with you sets your final price.
We’re Jasper Chimney Sweep, and we handle chimney sweeping, chimney inspection, and chimney repair as one continuous job. That matters on a pricing page: when the crew that inspected your chimney is the same crew that repairs it, you don’t pay twice for someone to climb up and look again.
Key Takeaways
- Most Winston-Salem chimney repairs cost $350 to $750.
- Chimney caps and dampers, the cheapest line items, run $150 to $450 installed.
- A full stainless steel liner install starts around $1,800 and can exceed $5,500.
- Estimates are free. Call (866) 343-2983. We answer 24/7, with fast dispatch from 7am to 7pm.
Chimney Repair Cost Breakdown (2026)
These ranges reflect what we see quoted across Winston-Salem and the surrounding Triad. Actual pricing depends on chimney height, access, the material involved, and how much hidden damage the inspection turns up.
| Repair Item | Typical Price Range |
|---|---|
| Chimney cap (Gelco or Famco, installed) | $150 – $450 |
| Top-sealing damper (Gelco or Famco) | $250 – $550 |
| Mortar crown rebuild or resurface | $350 – $900 |
| Repointing brick and mortar joints | $400 – $1,200 |
| Flue tile crack seal or replacement | $300 – $800 |
| HeatShield ceramic liner sealant repair | $600 – $1,600 |
| DuraFlex flexible stainless liner install | $1,800 – $4,000 |
| Rigid stainless liner install (taller or offset flues) | $2,200 – $5,500 |
| Chimney chase cover replacement | $400 – $950 |
| Partial chimney rebuild (above roofline) | $2,500 – $6,000 |
| Full chimney inspection with written report | $150 – $350 |
| Chimney sweep (paired with inspection) | $150 – $300 |
A few things push a job toward the top of a range. Latex paint or a cheap “mortar” coating from a previous fix often has to be stripped before we can apply a real repair system, and that adds labor. Taller chimneys, roof pitches steep enough to slow us down, and metal or offset flues all raise the price. So does anything the inspection finds after we’ve already set a mid-range estimate.
The materials also change the number. We stock and install DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Those are the same professional-grade brands certified chimney technicians specify nationwide. Big-box caps and liners cost less on the shelf, but they tend to come back for the same fix in two seasons, and that’s not a saving.
What Affects Chimney Repair Pricing in Winston-Salem
Every chimney in Winston-Salem is priced as its own job, and six factors move the number the most.
- Chimney height and access. A one-story ranch with clear roof access prices very differently from a taller two-story with a steep pitch and a chimney tucked in a valley. Access scaffolding and harness time are real costs on tall work, and we won’t cut that corner.
- How much moisture damage the inspection finds. Winston-Salem’s damp winters and humid summers are hard on masonry. Brick and mortar joints absorb water through the fall and freeze in January, and after a handful of cycles the joints spall and the crown cracks. Chimneys here often show more hidden water damage than the homeowner expected. A thorough inspection catches it before a small joint repair turns into a rebuild.
- Clay flue tile vs. stainless liner. Repairing clay tiles that are cracked or shifted is often possible, and HeatShield ceramic sealant is the system we reach for to reline one without tearing it out. But if the tiles are badly deteriorated or the flue was built for a wider appliance than you now burn, a DuraFlex stainless liner is the durable answer and costs more.
- Whether a previous repair has to come off first. Painted brick, silicone-smothered joints, and a “rebuilt” crown poured from the wrong mix all have to be stripped before the real repair goes on. That prep is part of the price.
- Caps and dampers. Adding a Gelco or Famco cap and top-sealing damper is the cheapest way to stop incoming water, and it’s often what keeps the rest of the chimney from needing more work later. It’s on the low end of the table for a reason. We include it when the chimney needs it, not as an upsell.
- Whether the chimney is used, unused, or being closed off. A wood-burning chimney needs a working flue and a cap. A chimney that’s been sealed off or converted to a gas appliance needs different parts and different draft sizing, and the price follows the part.
One thing you won’t see in our pricing: a fee to walk the property and hand you a number. The estimate is free, and the written estimate sets the final price once you decide to go ahead.
How to Save on Chimney Repair
The cheapest chimney repair is the one you do before the leak gets worse. A $150 to $350 inspection that catches a failing crown in the fall can save you a partial rebuild in the spring. Beyond that, these are the practical ways to keep the number down.
- Pair the sweep with the inspection. We pair a full-system inspection with every sweep. You pay once for access and get a written understanding of the chimney’s condition, not just a cleaning receipt.
- Fix the water path first. A cap and a crown repair are two of the lowest-cost items in the table and they stop most of the damage that turns a small repair into a big one. Any chimney without a proper cap is taking on water every storm.
- Repair the liner before it fails. HeatShield ceramic sealant costs far less than a full stainless liner install, and on a flue that’s still structurally sound it’s often the right call. Wait until the tiles are falling in, and the only option left is the $1,800-plus liner.
- Get the whole system priced at once. A repair here and a repair there from different contractors means paying for access, inspection, and setup more than once. One company handling inspection, sweeping, and repair keeps that overhead down. Our technicians have up to 9 years of experience, so they’ve seen the different ways this work goes wrong.
- Ask for a written scope. A written estimate that names the materials (DuraFlex liner, HeatShield sealant, Gelco or Famco cap) protects you from a low verbal quote that turns into a surprise halfway up the scaffold.
For a free estimate, call (866) 343-2983. We answer 24/7, with fast dispatch from 7am to 7pm Sunday through Friday. Estimates are free and there’s no pressure once we’ve taken a look.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Winston-Salem?
Most chimney repairs in Winston-Salem cost $250 to $1,200, with the typical job landing between $350 and $750. Common items include crown repair, repointing, caps, dampers, and flue-tile sealing. Larger work like a full liner install or a partial rebuild runs $1,800 to $6,000. Call (866) 343-2983 for a free estimate – the written estimate sets your final price.
Is it cheaper to repair or replace a chimney liner?
Repair is usually cheaper when the liner is still structurally sound. HeatShield ceramic sealant repair runs $600 to $1,600, while a full DuraFlex stainless liner install starts around $1,800. If the tiles are deteriorated or the flue is oversized, though, repair just delays the replacement. Call (866) 343-2983 and we’ll tell you which one your chimney actually needs.
How much does chimney repair cost if the crown is cracked?
Crown repair or resurfacing in Winston-Salem typically costs $350 to $900, and a full crown rebuild sits at the upper end. Left alone, a cracked crown lets water into the chimney top every rain, and that’s what drives the repair into a rebuild. Call (866) 343-2983 for a free estimate before the crack widens.
Can you come today?
Same-day service is often available, and we dispatch from 7am to 7pm Sunday through Friday. For anything urgent, call (866) 343-2983 and we’ll book you into the next opening. That number is answered 24 hours a day.
How much does a chimney cap cost in Winston-Salem?
A Gelco or Famco chimney cap installed runs $150 to $450, and a top-sealing damper runs $250 to $550. That’s the least expensive line on the table and the one that stops the most water damage. Call (866) 343-2983 – estimates are free.
Do I need a repair or just a cleaning?
A cleaning costs $150 to $300 and a full inspection runs $150 to $350, so a combined visit is far less than a repair. If the inspection finds nothing broken, that’s the whole bill. If it finds a real problem, you’ll know the number before any work starts. Call (866) 343-2983 to schedule.
Pricing Safety Note
Some of what we find up a chimney isn’t a pricing decision – it’s a safety one. Cracked flue tiles, a failed crown, a chimney whose draft is blocked, or a masonry stack that’s pulling away from the house all need a trained professional, not a weekend repair from the hardware store. Never climb a steep roof or open up a flue liner on your own. The fix that matters is done right, by someone who climbs for a living and checks the whole system, not just the part that’s leaking today.
We treat your chimney as a system, not just a dirty flue. Inspect, clean, repair, handled by one crew and one standard of work. That’s the reason a Winston-Salem homeowner can get a straight price, a written scope, and a chimney that’s built to last rather than built to bring you back next season for the same fix.
Written by the team at Jasper Chimney Sweep.
Pricing reflects the Winston-Salem market as of 2026. Jasper Chimney Sweep offers free estimates – call (866) 343-2983.
What Our Customers Say
"Fast, fair, done right. No notes."
- Farah Saleh"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Lisa Reed"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Mark Rhodes